Home
Topic
2.7 Chrysler – camshaft reinstallation

2.7 Chrysler – camshaft reinstallation

This topic has 1 reply, 2 voices, and was last updated 5 years ago by Its me.

Creator

Topic
April 25, 2019 at 6:14 am #893389
Elle Eman
Participant
What is best method to reinstall the cams after head gasket replacement? Had set time before removal, but the spring pressure on the valves obviously has things not so aligned. How do I reinstall?
Creator

Topic

Viewing 1 replies (of 1 total)

Author

Replies
April 26, 2019 at 1:32 am #893394
Its me
Moderator
If the head is already attached to the engine, move pistons to an all even level, I.E. none at TDC they should be halfway between stroke. (use a long screwdriver down the spark plug hole to check). Then install the Cam. Once the Cam is installed, turn the cam to ensure all valves are shut and rotate the crank to appropriate position for the pistons and put in time by slowly rotating the cam. If you make contact, stop and re-think what you have done.

-Karl
Author

Replies

Viewing 1 replies (of 1 total)

You must be logged in to reply to this topic.

Loading…