Forum Replies Created
-
Replies
-
New Varta G8 battery installed for the coming winch.
E-brake new install kit:
[url=http://www.upload.ee/image/5676282/20160325_131021.jpg]
New caliper sliders:
[url=http://www.upload.ee/image/5676284/20160325_131049.jpg]
Put on the mud tyres:
[url=http://www.upload.ee/image/5676293/20160325_165244.jpg]
Lower guard installed too:
[url=http://www.upload.ee/image/5642956/20160313_174032.jpg]
[url=http://www.upload.ee/image/5642955/20160313_174103.jpg]
A little build today:
[url=http://www.upload.ee/image/5624428/20160305_165259.jpg]
[url=http://www.upload.ee/image/5624429/20160306_140050.jpg]
[url=http://www.upload.ee/image/5624430/20160306_201302.jpg]
[url=http://www.upload.ee/image/5624431/20160306_201312.jpg]
New tyres for the ZJ:
Insa Turbo Special Track
235/75/15
[url=http://www.upload.ee/image/5607607/20160229_174253.jpg]
CV ends are changed, both of them.
Also put on the WJ LCAs. Got the pinion angle better and the noise on 55-60km/h is almost gone nowBack rotors and pads where changed today, also idle pulley.
[url=http://www.upload.ee/image/5584147/20160221_121850.jpg]
Steering wheel is now about 90 degrees to the left, when going straight.
No bend marks on anything. Only the collar of the drag link was so loose, I could rotate it by hand, so I straitened the steering wheel. And tightened the collar.
Found a little piece of wood inside of the tyre and the wheel contact eage.
Fixed it too:)
A litte trip to the woods, at the beginning just a shortcut, but we had to take the rough road:)
[url=http://www.upload.ee/image/5484934/IMG-20160116-WA0002.jpg]
Changed the PCV and CCV today.
E-brake kit and fuel filter are waiting for spring.
[url=http://www.upload.ee/image/5469823/20160106_185710.jpg]
Picked up the 242 from´90 Cherokee.
When it gets warmer I make the change:)
[url=http://www.upload.ee/image/5440928/20151230_190405.jpg]
[url=http://www.upload.ee/image/5440929/20151230_190501.jpg]
[url=http://www.upload.ee/image/5440936/20151230_190521.jpg]
Just installed the original radio with new “wooden” trim cover :
[url=http://www.upload.ee/image/5430446/20151226_183720.jpg]
Only had one original plug, so had to “homemade” the other:
[url=http://www.upload.ee/image/5430450/20151226_155242.jpg]
Got some new Monroe shocks for very good price and made the switch tonight.
[url=http://www.upload.ee/image/5393025/20151210_173722.jpg]
The driver side shock was making sound for a reason:
[url=http://www.upload.ee/image/5393024/20151210_204027.jpg]
Also changed the TPS – much more better pedal feel.
So I reinstalled the front swaybar with new bushings.
Also changed the sparks:
[url=http://www.upload.ee/image/5277375/IMG_20151022_154304.jpg]
Did the front lift this weekend:
[url=http://www.upload.ee/image/5252743/IMG_20151011_140239.jpg]
A little bit higher than the rear, but its ok.
Removed the stabilizer bar also, couse the bushing where bad.
Gonna drive some time and deside if I need it back at all B)
This weekend did some work on the Jeep B)
Changed to humming rear axle and put in some new spring to get 3 inch lift.
[url=http://www.upload.ee/image/5238068/IMG_20151001_131839.jpg]
Just need to lift the front also in coming weeks 🙂