Forum Replies Created
-
Replies
-
Had a stuttering, no power when accelerating and rich fuel smell and finally a code for bad MAP.
So I measured the MAP output voltage when the engine was working good and when bad.
Got the confirm that the MAP is bad I changed it and all good now B)
The 5.9 e-fan installed:
Controlled by the Volvo relay:
[url=https://www.upload.ee/image/6039438/20160730_134041.jpg]
[url=https://www.upload.ee/image/6039440/Capture.JPG]
5.9 temp sensor with housing:
[url=https://www.upload.ee/image/6039445/20160806_202013.jpg]
Relays by the battery:
[url=https://www.upload.ee/image/6039449/20160806_202003.jpg]
The Low speed is controlled automatically by the sensor, the High side is controlled by a switch in the cabin if I need it in the woods.
Radiator failed on Friday, got a good one and installed it today. Hope it lasts some time, the old one was still the original.
Changed the PS pump bracket today, all is good now, belt is quiet again.
The newer bracket is so thin, no wonder it brakes sometimes.
[url=https://www.upload.ee/image/6006230/20160726_203205.jpg]
[url=https://www.upload.ee/image/6006231/20160726_203153.jpg]
More powerful alt and power steering pump are installed.
Some after mudding pics:
[url=https://www.upload.ee/image/5995371/20160716_175841.jpg]
Gonna need to cut some holes, for the mudd to go away:
[url=https://www.upload.ee/image/5995374/20160716_190344.jpg]
5.9 hood installed and light changed:
[url=https://www.upload.ee/image/5995375/20160720_180055.jpg]
Took away the rear sway bar, and finally adjusted the e-brake.
Changed the rear LCA axel side bushings:
[url=https://www.upload.ee/image/5896757/20160618_213730.jpg]
Installed 2 recovery points:
[url=https://www.upload.ee/image/5896758/20160618_213850.jpg]
Added 2 LED reverse lights:
[url=https://www.upload.ee/image/5896756/IMG-20160618-WA0006.jpeg]
Dont see the point of selling them, its good to have them, if I have new problems in the future or if someone local needs them ASAP I can borrow them.
Got some front axels with u-joints:
[url=https://www.upload.ee/image/5879315/20160611_171538.jpg]
Changed the steering shock:
[url=https://www.upload.ee/image/5879316/20160612_152006.jpg]
Some new pic of the car today:
[url=https://www.upload.ee/image/5879317/20160612_163211.jpg]
[url=https://www.upload.ee/image/5879318/20160612_163226.jpg]
Thanks Mutaz, good to hear that someone reads the thread 😛
Finaly found the stalling reason – bad PCM, after changing it, no more stalls – also the outer temp display shows real temperature.
For no reason I changed all the sensors of the car for 350€ and finaly it wanted a 50€ PCM from a scrapyard car :angry:
At least I got a new winch in front of the car and a spare sensors for the rest of this cars life B)
Random stalling sometimes:
One day I can drive 100 miles, no problem – some days stalls 5-6 times in a few miles.
Changed the CPS, checked for grounds,terminal connections ,cleaned PCM plug, changed temp sensors etc. – stalling still.
Now changed PCM capacitors – let see how it works. Never got a check engine light when stalling to help me out.
PS! I would like to kick the engineer in the mouth who placed the CPS in that location :angry:
Did the 249 to 242 swap today, best part was the oil filling :cheer:
[url=http://www.upload.ee/image/5789111/20160507_162929.jpg]
Teared down the 242 today, all is good.
Now need the input shaft from my 249 and fun begins:laugh2:
[url=http://www.upload.ee/image/5755765/20160424_162434.jpg]
[url=http://www.upload.ee/image/5755768/20160424_162418.jpg]
Changed the PCV and valve cover gaskets.
[url=http://www.upload.ee/image/5737636/20160415_181355.jpg]
