Menu

Wes

Forum Replies Created

Viewing 7 replies - 1 through 7 (of 7 total)
  • Author
    Replies
  • in reply to: 2011 Kia Rio, Idle and Misfire issues #859689
    WesWes
    Participant

      So your O2 sensors (if they are working) react to how the engine is performing and aid the ECU in maintaining best fuel economy. You missed some important information here, are you in closed loop? You need long term fuel trim values. Also clean throttle body, EGR valve if you can, and clean IAC valve is available. Thats where I would start.

      in reply to: MAF Sensor Problems after replacement #859688
      WesWes
      Participant

        Have you cleaned the throttle body? To me it sounds like a vacuum leak somewhere.

        in reply to: question about flushing the radiator #859687
        WesWes
        Participant

          Vinyl you did a super multistep flush. Cam is talking about flushing and filling once not 5 times like you. A super 5 step flush would be necessary in an old radiator or if you have blockage somewhere in the system.. Also Cam was talking about what to put in not your 5 step dilutions. The point is to check the freezing/boiling points of your mixture and add accordingly. With all this time spent you might as well change the radiator and be done with it.

          in reply to: 05 caravan – Airbag code “No OCM Message” Can I? #859211
          WesWes
          Participant

            does anyone have scanner with trouble shooter who can help me with this code?

            in reply to: 1999 Acura TL TCS #859034
            WesWes
            Participant

              my coworker has a 07 acura TL. they had an issue with the TCS light and an engine light coming with very weak acceleration issues. problem was throttle pedal position sensor, needed new sensor from acura. May or may not be your issue but look into it.

              in reply to: 05 caravan – Airbag code “No OCM Message” Can I? #859033
              WesWes
              Participant

                I was really hoping on getting this answered. Anyway thanks everyone, please respond if you have any ideas.

                WesWes
                Participant

                  I don’t have the money for that I’m trying to do a diagnosis. Yes I know the connectors for airbag system are yellow I know there is a way to check for power, ground, signal without activation of airbags i need to which wires to check. I have done a visual inspection as much as I can without disrupting anything there. I know the OCM module is under the passenger seat I can see it . No problems with the wires I can see. I also know that replacement might require recalibrating the weights in the seat which I would need a better scan tool and weights. I want to confirm that.

                Viewing 7 replies - 1 through 7 (of 7 total)
                Loading…
                toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                situs toto situs toto