Menu

wtbm123

Forum Replies Created

Viewing 14 replies - 1 through 14 (of 14 total)
  • Author
    Replies
  • in reply to: 04 Sierra ,Truck off and high beam light stays on. #496195
    wtbm123wtbm123
    Participant

      Update on 04 GMC Sierra. I still do not know the cause. After my last post I got swamped with customers cars. After the truck sat a week or two. With battery hooked up ,I got thinking I better go Check if battery was dead. I looked in the truck and saw no blue light. So i tried starting the truck and it started right up. I have been watching and have drove the truck some ,but the light has never came back on.If the light ever comes back on I will try and figure it out. Thanks for all the help. Sorry I have no answer to what was wrong.

      in reply to: 04 Sierra ,Truck off and high beam light stays on. #497523
      wtbm123wtbm123
      Participant

        Update on 04 GMC Sierra. I still do not know the cause. After my last post I got swamped with customers cars. After the truck sat a week or two. With battery hooked up ,I got thinking I better go Check if battery was dead. I looked in the truck and saw no blue light. So i tried starting the truck and it started right up. I have been watching and have drove the truck some ,but the light has never came back on.If the light ever comes back on I will try and figure it out. Thanks for all the help. Sorry I have no answer to what was wrong.

        in reply to: 04 Sierra ,Truck off and high beam light stays on. #483504
        wtbm123wtbm123
        Participant

          Thanks . I have already pulled up the wiring diagram. Love that site. My scanner shows no body codes or any codes set at all. I checked all grounds ,and all tested good. I was leaning toward the BCM or the DRL Module. Just weird that every thing i have done has tested ok and no codes.. Thanks for your reply.

          in reply to: 04 Sierra ,Truck off and high beam light stays on. #484406
          wtbm123wtbm123
          Participant

            Thanks . I have already pulled up the wiring diagram. Love that site. My scanner shows no body codes or any codes set at all. I checked all grounds ,and all tested good. I was leaning toward the BCM or the DRL Module. Just weird that every thing i have done has tested ok and no codes.. Thanks for your reply.

            in reply to: 04 Sierra ,Truck off and high beam light stays on. #483499
            wtbm123wtbm123
            Participant

              Have tried the reset. I have a scanner and no codes have been set Thanks for the reply.

              in reply to: 04 Sierra ,Truck off and high beam light stays on. #484400
              wtbm123wtbm123
              Participant

                Have tried the reset. I have a scanner and no codes have been set Thanks for the reply.

                in reply to: 04 Sierra ,Truck off and high beam light stays on. #483495
                wtbm123wtbm123
                Participant

                  Tried disconnecting battery a few times even over night . no change. Thanks for the reply

                  in reply to: 04 Sierra ,Truck off and high beam light stays on. #484395
                  wtbm123wtbm123
                  Participant

                    Tried disconnecting battery a few times even over night . no change. Thanks for the reply

                    in reply to: 04 Sierra ,Truck off and high beam light stays on. #483493
                    wtbm123wtbm123
                    Participant

                      Nothing related in owners manual. Thanks for the reply.

                      in reply to: 04 Sierra ,Truck off and high beam light stays on. #484393
                      wtbm123wtbm123
                      Participant

                        Nothing related in owners manual. Thanks for the reply.

                        in reply to: 04 Sierra ,Truck off and high beam light stays on. #483491
                        wtbm123wtbm123
                        Participant

                          No remote start and no aftermarket stuff on truck I have a scanner and no codes are set . thanks for the imput.

                          in reply to: 04 Sierra ,Truck off and high beam light stays on. #484391
                          wtbm123wtbm123
                          Participant

                            No remote start and no aftermarket stuff on truck I have a scanner and no codes are set . thanks for the imput.

                            in reply to: 01 Toyota Camary #483115
                            wtbm123wtbm123
                            Participant

                              I would use a block tester to see if head gasket leaks. have you tried taking the temp with a gauge or something not in the car. or a point and shoot temp gun to confirm the dash gauge is working right.

                              in reply to: 01 Toyota Camary #483986
                              wtbm123wtbm123
                              Participant

                                I would use a block tester to see if head gasket leaks. have you tried taking the temp with a gauge or something not in the car. or a point and shoot temp gun to confirm the dash gauge is working right.

                              Viewing 14 replies - 1 through 14 (of 14 total)
                              Loading…
                              toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                              situs toto situs toto