[web]

yes i have driven it, drives the same as before.

the lights were never on before the storm, i just dont get it.

[web]

update

i looked for the bolts to remove the motor and noticed 2 unconnected harnesses. the harness for the motor was still connected, so i left them alone. any idea what they could be for?

i shined a light into the vent ducts and noticed a piece of gray foam sandwiched to another piece of foam, i used a thin tool to seperate them a bit and now i have full pressured air.

the only vent that doesnt have pressure is the driver side one by the door.

what is that foam? was it alright that a moved it a bit?

also all speeds of the fan work.

[web]

update

i looked for the bolts to remove the motor and noticed 2 unconnected harnesses. the harness for the motor was still connected, so i left them alone. any idea what they could be for?

i shined a light into the vent ducts and noticed a piece of gray foam sandwiched to another piece of foam, i used a thin tool to seperate them a bit and now i have full pressured air.

the only vent that doesnt have pressure is the driver side one by the door.

what is that foam? was it alright that a moved it a bit?

also all speeds of the fan work.

[web]

thanks for all the info guys

[web]

not yet.

[web]

i noticed when i put the car in reverse than into drive it doestnt jerk at all, and shifts great._x000D_
_x000D_
im going to take it in and get the low trac light checked._x000D_
_x000D_
thanks guys.

[web]

i will check the fluid._x000D_
_x000D_
yes, it happens when cold._x000D_
_x000D_
il also look at my tach next time this happens._x000D_
_x000D_
sometimes it doesnt jerk at all when put into drive._x000D_
_x000D_
what could be the cause if this only happens when the car is cold?

[web]

update – i got the right front window working now, i cleaned the master switch and greased the regulator._x000D_
_x000D_
the back right window still doesnt move and the door switch doesnt move it either._x000D_
_x000D_
thanks for the help guys

[web]

awesome video, exact switch i was cleaning too. I did clean it again and i have motor function in one of the windows, but the motor will stop working and the window gets stuck, but the motor works fine when the window isnt installed._x000D_
_x000D_
i think you are ri

[web]

this happened last year too, one day the window worked so i know the motor works._x000D_
_x000D_
i cleaned the switch last night but it didnt help._x000D_
_x000D_
thanks for the info guys

[Author]

Replies