Menu

Troy Bimmer

Forum Replies Created

Viewing 12 replies - 1 through 12 (of 12 total)
  • Author
    Replies
  • March 11, 2014 at 4:16 pm in reply to: mx6 overheat #579944
    Troy BimmerTroy Bimmer
    Participant

      Thank you. I finally got it to start. The way my distributor was number and the way the book said to do it was 2 different things. Neither of them were right. I broke the housing to the thermostat. I ordered a new one. When i put the new gasket on it still leaked before i broke it. Is there a certain way it goes? Like the gasket then the theromostat then the housing?id take it to a shop but dont have the money for it.

      March 11, 2014 at 4:16 pm in reply to: mx6 overheat #586851
      Troy BimmerTroy Bimmer
      Participant

        Thank you. I finally got it to start. The way my distributor was number and the way the book said to do it was 2 different things. Neither of them were right. I broke the housing to the thermostat. I ordered a new one. When i put the new gasket on it still leaked before i broke it. Is there a certain way it goes? Like the gasket then the theromostat then the housing?id take it to a shop but dont have the money for it.

        March 8, 2014 at 2:17 am in reply to: mx6 overheat #579220
        Troy BimmerTroy Bimmer
        Participant

          Any ideas?

          March 8, 2014 at 2:17 am in reply to: mx6 overheat #586067
          Troy BimmerTroy Bimmer
          Participant

            Any ideas?

            March 1, 2014 at 11:32 pm in reply to: mx6 overheat #577972
            Troy BimmerTroy Bimmer
            Participant

              And i checked all of the fuses and they are good. New battery

              March 1, 2014 at 11:32 pm in reply to: mx6 overheat #584778
              Troy BimmerTroy Bimmer
              Participant

                And i checked all of the fuses and they are good. New battery

                March 1, 2014 at 11:32 pm in reply to: mx6 overheat #577971
                Troy BimmerTroy Bimmer
                Participant

                  I dont see a bleeder fir the coolant. I have the manyal and i dont see anything for it. I had a driend hook up the battery backwards and tried to start it. I replaced the ecu and the dustributor that had my ignition control module built in. When i try and start it it just rolls over and dont fire. I tryed to pop start it and it starts but i cant push on the gas to go and then it stops

                  March 1, 2014 at 11:32 pm in reply to: mx6 overheat #584776
                  Troy BimmerTroy Bimmer
                  Participant

                    I dont see a bleeder fir the coolant. I have the manyal and i dont see anything for it. I had a driend hook up the battery backwards and tried to start it. I replaced the ecu and the dustributor that had my ignition control module built in. When i try and start it it just rolls over and dont fire. I tryed to pop start it and it starts but i cant push on the gas to go and then it stops

                    January 20, 2014 at 10:56 am in reply to: mx6 overheat #576423
                    Troy BimmerTroy Bimmer
                    Participant

                      It was running rough. I think it was because 3 and 4 were misfiring. I hope that is just plugs and wires. What coolamt should I put in it? Do you have any idea where the bleeder screw is for the coolant? I dont have a book right now but I will in a few days.

                      January 20, 2014 at 10:56 am in reply to: mx6 overheat #569896
                      Troy BimmerTroy Bimmer
                      Participant

                        It was running rough. I think it was because 3 and 4 were misfiring. I hope that is just plugs and wires. What coolamt should I put in it? Do you have any idea where the bleeder screw is for the coolant? I dont have a book right now but I will in a few days.

                        January 19, 2014 at 10:37 pm in reply to: mx6 overheat #576232
                        Troy BimmerTroy Bimmer
                        Participant

                          Thanks. The coolants is like a milky bworm like it has been in the awhile. I dont remember what coolant was in it before.

                          January 19, 2014 at 10:37 pm in reply to: mx6 overheat #569718
                          Troy BimmerTroy Bimmer
                          Participant

                            Thanks. The coolants is like a milky bworm like it has been in the awhile. I dont remember what coolant was in it before.

                          • Author
                            Replies
                          Viewing 12 replies - 1 through 12 (of 12 total)
                          Loading…