Forum Replies Created
- Replies
fuel is MUCH cleaner than it used to be, fuel tanks are plastic, and the whole system is better sealed so its not a big problem or honda would of not done it as they no more about it than us
fuel is MUCH cleaner than it used to be, fuel tanks are plastic, and the whole system is better sealed so its not a big problem or honda would of not done it as they no more about it than us
[quote=”Sean298″ post=55346]I have a small clutch leak so I thought my clutch fluid would be low, I put some in it and while I was there I put in some more brake fluid, I put too much in and it came out and got on something, now when I turn it sounds like there is something rubbing on something. (I could take a video)
This noise occurs when it is stopped and moving, and right when you put the brakes on.[/quote]
why do you think you have a clutch leak. whats not working as it should. over filling will do nothing apart from poor over the floor. can you tell me where about’s you think the clutch fluid should go as you may of fill the wrong one
[quote=”Sean298″ post=55346]I have a small clutch leak so I thought my clutch fluid would be low, I put some in it and while I was there I put in some more brake fluid, I put too much in and it came out and got on something, now when I turn it sounds like there is something rubbing on something. (I could take a video)
This noise occurs when it is stopped and moving, and right when you put the brakes on.[/quote]
why do you think you have a clutch leak. whats not working as it should. over filling will do nothing apart from poor over the floor. can you tell me where about’s you think the clutch fluid should go as you may of fill the wrong one
What type of diagnostic brand equipment does your shop use. Snap-on,Bosch,Launch,Genysis,OTC, Modis… snap on/ other
How many bays are designated to each master tech? 1Do you have your own laptop (company provided) at your work station? no
Does your shop provide uniforms,401k,insurance,locker room,training rooms,sick days,etc.? no
Do you have to work weekends? no
Is your pay salary,flat rate,hourly,commission, or a combination of any listed? flat rate + commission
What is the most important requirement at your workplace to keep you happy? hot drinks
Do you work in an independent shop or a dealership? independent
How many service writers do you work? What is the ratio of techs per service writer sorry dont understand
What type of diagnostic brand equipment does your shop use. Snap-on,Bosch,Launch,Genysis,OTC, Modis… snap on/ other
How many bays are designated to each master tech? 1Do you have your own laptop (company provided) at your work station? no
Does your shop provide uniforms,401k,insurance,locker room,training rooms,sick days,etc.? no
Do you have to work weekends? no
Is your pay salary,flat rate,hourly,commission, or a combination of any listed? flat rate + commission
What is the most important requirement at your workplace to keep you happy? hot drinks
Do you work in an independent shop or a dealership? independent
How many service writers do you work? What is the ratio of techs per service writer sorry dont understand
it says for most gearboxs to use Honda MTF(landrover MTF is the same) oil thats not cheap how bad is it to run the wrong gearbox oil
it says for most gearboxs to use Honda MTF(landrover MTF is the same) oil thats not cheap how bad is it to run the wrong gearbox oil
What will Steel Seal not fix?
Steel Seal will not seal leaks in hoses, seals, water pumps, or extremely large cracks in the head or block resulting in the vehicle not starting. If it does not run Steel Seal can not work as it relies on temperature
What will Steel Seal not fix?
Steel Seal will not seal leaks in hoses, seals, water pumps, or extremely large cracks in the head or block resulting in the vehicle not starting. If it does not run Steel Seal can not work as it relies on temperature
are you on about steel seal i rate it the best of the poor in gasket fix’s but it cost the most they offer money back guarantee! but its hard and long
are you on about steel seal i rate it the best of the poor in gasket fix’s but it cost the most they offer money back guarantee! but its hard and long
[quote=”antonvas94″ post=54964]ok i so i took of the timing belt again, aligned everything right, doubled checked the valves, they were good. The car starts but there is still no compression in cylinder 2, it only works on 3 cylinders, it works the same like before when i started working on it, so i guess the problem was not valves. What could it be?[/quote]
Burnt valve,broken valve, valve not seating,hole in piston,broken valve spring