Forum Replies Created
-
AuthorReplies
-
Ill give it a shot seems timing is far off but not sure how to check valve timimg with out tearing into the front of the motor
the video above shows a big bright blue spark mine is short small and more orange
the video above shows a big bright blue spark mine is short small and more orange
no I just pulled them out they are shiny black and smell like gas and a nother thing to add I was turning it over and It kept sounding like it was hydro locked every other revolution or so with every thing connected but if I unplugged the tbi injectors it didn’t do it
no I just pulled them out they are shiny black and smell like gas and a nother thing to add I was turning it over and It kept sounding like it was hydro locked every other revolution or so with every thing connected but if I unplugged the tbi injectors it didn’t do it
its a 95 chevy k1500 with the 350 5.7 tbi
:sick:its a 95 chevy k1500 with the 350 5.7 tbi
:sick:nope left me high and wet took a bottle to it last night seems one of the spark plug wires hardened and cracked and was arcing to the block due to a missing heat shield on the pass side exhaust manifold getting new wires today and got some silicone to put around the base of the cap thanks guys helped a lot
nope left me high and wet took a bottle to it last night seems one of the spark plug wires hardened and cracked and was arcing to the block due to a missing heat shield on the pass side exhaust manifold getting new wires today and got some silicone to put around the base of the cap thanks guys helped a lot
That video helped quiet a bit thank you I’ll look for the arc
That video helped quiet a bit thank you I’ll look for the arc
so what do you guys think i should do to fix my problem i found that its retarding the timing all the time not just when its needed
these are great only prob this circut is missing from the harness
well i found out the 95 is a slit year some had the spark control module some didnt the ones that didnt have the knock senser wired directly to the pcm
dizzy and i replaced the plugs wires cap and rotor hoping it would fix it and its a code 43
-
AuthorReplies