Forum Replies Created
-
Replies
-
Replaced module. Security flashes like crazy. no start. just for fun did crank sensor. Lo and behold it started. Secerity still flashes like crazy but runs grrat now.Guess it was working just enough tothrow spark and not set a code but also to weak to fully function
Replaced module. Security flashes like crazy. no start. just for fun did crank sensor. Lo and behold it started. Secerity still flashes like crazy but runs grrat now.Guess it was working just enough tothrow spark and not set a code but also to weak to fully function
Yes valve body must be taken out. Make sure you label everything. Hardest part is trying not to drop the valve body and letting the check balls fall out
Yes valve body must be taken out. Make sure you label everything. Hardest part is trying not to drop the valve body and letting the check balls fall out
Top dead center. Cam closest to firewall will have i believe the diamond facei.g in the 9 oclock position. Cam near front of car will be arrow in 3 oclock position. Dont make me swear if it diamond or arrow. Going of memory. The attache your wrench to.the cam closest to front end and put tension in the chain. Then put you ratchet on balancer bolt and apply tension to line everything up. Hope this helps with the timeing issue.
Top dead center. Cam closest to firewall will have i believe the diamond facei.g in the 9 oclock position. Cam near front of car will be arrow in 3 oclock position. Dont make me swear if it diamond or arrow. Going of memory. The attache your wrench to.the cam closest to front end and put tension in the chain. Then put you ratchet on balancer bolt and apply tension to line everything up. Hope this helps with the timeing issue.
Link did not help. Got into the car yesterday and smelt something burnt. Took the pass keyy 3 module out and saw the back of the circute board fried. I hope this fixes. But whats wierd is security light did not stay on or blink
Link did not help. Got into the car yesterday and smelt something burnt. Took the pass keyy 3 module out and saw the back of the circute board fried. I hope this fixes. But whats wierd is security light did not stay on or blink
Ok. Swapped relay box and now have.power. Swapped cam sensor and still no injector ground pulse. Im about tolight the car on fire.
Ok. Swapped relay box and now have.power. Swapped cam sensor and still no injector ground pulse. Im about tolight the car on fire.
After getting ahold of a wire.diag i was getting power to fuse buy now no power to injectors. Pulled relay box and no power from box. Checked three times. Power to and from fuse.but not from box.Found out customer blee injector fuse and used a piece of wire till it got to hot. Thinking it fried the.relay box
After getting ahold of a wire.diag i was getting power to fuse buy now no power to injectors. Pulled relay box and no power from box. Checked three times. Power to and from fuse.but not from box.Found out customer blee injector fuse and used a piece of wire till it got to hot. Thinking it fried the.relay box
More info. Customer was in mcdonolds drive threw and turned off car. Would never restart. Popped injector fuse. They said when they put another fuse in it popped again. So he put sone wire in place if the fuse and said the wire became very hot. I puy fuse in and showing grounded when keys off and power when keys on. But no power or ground to injectors. Resistance of injectores were all 13.5 ohms