Menu

Andy White

Forum Replies Created

Viewing 9 replies - 61 through 69 (of 69 total)
  • Author
    Replies
  • in reply to: HVAC/Vent doors #462222
    Andy WhiteAndy White
    Participant

      I Was thinking of just Scraping out the old air seals and just glue new ones in place making sure they seal it back up like it should

      in reply to: HVAC/Vent doors #462224
      Andy WhiteAndy White
      Participant

        (I Meant Scraping Sorry) Scrap The Old

        in reply to: HVAC/Vent doors #462216
        Andy WhiteAndy White
        Participant

          What About Puling the Steering Column Out and Tilting the top of the dash Down would i be able to get access the doors from the top of the dash?

          in reply to: HVAC/Vent doors #462218
          Andy WhiteAndy White
          Participant

            Even If its More Work

            in reply to: HVAC/Vent doors #462221
            Andy WhiteAndy White
            Participant

              [quote]Quoted From moparfan: _x000D_
              _x000D_
              i wouldn’t worry about the heater core as much as the A/C. you could simply just unhook both hose’s to the heater core and blow some compressed air threw to clean it all out. then all the mess stays out side the ca

              in reply to: Vacuum/Problem #456608
              Andy WhiteAndy White
              Participant

                Quoted From rice400:

                I think the mode door on that model is vacuum operated so perhaps you have a vacuum leak or something along those lines

                Where is the mode door located and also would you know the Vacuum Hose Diagram Of this model?

                in reply to: ABS/Brake Problem #442986
                Andy WhiteAndy White
                Participant

                  Quoted From EricTheCarGuy:

                  You know if it were me I would clear the codes and check the rear brake adjustment and the operation of the rear shoes, the problem could be mechanical in nature and the ABS codes are just a symptom as ABS’s purpose is to PREVENT wheel lock up not cause it. It may be that the rear shoes are getting hung up on the backing plate, here’s a video that might help better explain what I’m talking about.

                  http://www.youtube.com/watch?v=195JUby2Uy4

                  http://www.youtube.com/watch?v=D6I9HtUC_hM

                  I took a look at both Sets of rear brake shoes and i cant find anything wrong with them i mean both sets of shoes have cracks down the middle of the pads. i had someone press the brake peddle to make sure they are Releasing all the way and they are. I cant find anything wrong with the mechanical part of the rear drum brake assembly

                  in reply to: ABS/Brake Problem #442983
                  Andy WhiteAndy White
                  Participant

                    Okay i Got 10 codes that came up i DID put the fuse back in for this too here are the codes in order

                    About the Brake Inter-lock It doesnt matter if its hooked up or not it does the same thing

                    Code 68 Locked motor or shorted motor circuit
                    Code 73 4 Wheel Anti-Lock (4WAL) control unit fault
                    Code 86 Shorted anti-lock warning lamp
                    Code 12 System Normal
                    Code 25 Left front speed sensor fault
                    Code 21 Right front wheel sensor fault
                    Code 27 Erratic left front speed sensor
                    Code 37 Erratic left rear speed signal or erratic VSS signal (1993)
                    Code 65 4 Wheel Anti-Lock (4WAL) control unit fault
                    Code 66 4 Wheel Anti-Lock (4WAL) control unit fault

                    in reply to: ABS/Brake Problem #442984
                    Andy WhiteAndy White
                    Participant

                      Quoted From college man:

                      First can you post all the codes that you read.
                      This is the first piece of the puzzle. second
                      if the problem started after the interlock switch
                      was replaced. then that maybe the beginning of
                      the problem.

                      Okay i Got 10 codes that came up i DID put the fuse back in for this too here are the codes in order

                      About the Brake Inter-lock It doesnt matter if its hooked up or not it does the same thing

                      Code 68 Locked motor or shorted motor circuit
                      Code 73 4 Wheel Anti-Lock (4WAL) control unit fault
                      Code 86 Shorted anti-lock warning lamp
                      Code 12 System Normal
                      Code 25 Left front speed sensor fault
                      Code 21 Right front wheel sensor fault
                      Code 27 Erratic left front speed sensor
                      Code 37 Erratic left rear speed signal or erratic VSS signal (1993)
                      Code 65 4 Wheel Anti-Lock (4WAL) control unit fault
                      Code 66 4 Wheel Anti-Lock (4WAL) control unit fault

                    Viewing 9 replies - 61 through 69 (of 69 total)
                    Loading…
                    toto togel situs toto situs toto