Forum Replies Created
- Replies
If the motor oil being used in an engine is lubricating so poorly that it is allowing excessive wear metals to get into the oil, the problem isn’t a magnet or not, it’s the oil!
Use better quality synthetic oils to rectify this problem.
If the motor oil being used in an engine is lubricating so poorly that it is allowing excessive wear metals to get into the oil, the problem isn’t a magnet or not, it’s the oil!
Use better quality synthetic oils to rectify this problem.
[quote=”skatejake51″ post=48364]I just recently bought a ’92 Honda Prelude Si and in the fuel door it says to only use premium gasoline. It has 277k miles on it and with rising gas prices I was curious if it really mattered. So, will it hurt anything mechanically if I use 87 vs 91? I have gotten both answers online.[/quote]
I’m not being rude mind you, but do you think Honda engineers are playing a joke on you? Might be better to trust Honda engineers than faceless, anonymous opinions on the Internet.
If you use lower octane fuel than what is recommended by the vehicle manufacturer this can cause detonation within the combustion chambers, which can blow holes right through pistons, bend or break connecting rods, causing very serious and expensive engine damage.
[quote=”skatejake51″ post=48364]I just recently bought a ’92 Honda Prelude Si and in the fuel door it says to only use premium gasoline. It has 277k miles on it and with rising gas prices I was curious if it really mattered. So, will it hurt anything mechanically if I use 87 vs 91? I have gotten both answers online.[/quote]
I’m not being rude mind you, but do you think Honda engineers are playing a joke on you? Might be better to trust Honda engineers than faceless, anonymous opinions on the Internet.
If you use lower octane fuel than what is recommended by the vehicle manufacturer this can cause detonation within the combustion chambers, which can blow holes right through pistons, bend or break connecting rods, causing very serious and expensive engine damage.
Has anyone ever purchased anything that was made in China that is actually a long-lasting, quality item?
We all know the answer to that question.
It costs less to purchase better quality parts and not have to worry about cheap made in China parts failing and needing replacement time after time.
Has anyone ever purchased anything that was made in China that is actually a long-lasting, quality item?
We all know the answer to that question.
It costs less to purchase better quality parts and not have to worry about cheap made in China parts failing and needing replacement time after time.
It would be wise to change the oil and filter. Sitting that long, your car might very well need a new battery as well.
It would be wise to change the oil and filter. Sitting that long, your car might very well need a new battery as well.
[quote=”FuelMJ” post=27907]Hey everyone. Have a quick question. Have a 2005 Pontiac GTO. Going to get my transmission and differential fluid changed soon. I bought the fluid and have it already to go. The transmission fluid is Mobil Dexron VI and the differential fluid is Torco. Bo[/quote]
Why use two different brands of fluids?
[quote=”FuelMJ” post=27907]Hey everyone. Have a quick question. Have a 2005 Pontiac GTO. Going to get my transmission and differential fluid changed soon. I bought the fluid and have it already to go. The transmission fluid is Mobil Dexron VI and the differential fluid is Torco. Bo[/quote]
Why use two different brands of fluids?
[quote=”Rob” post=49293]Wow! Thanks for all of the good info. I knew the benefits of synthetic oil but never really knew exactly why until now. I didn’t know about the new style of rings either. Thanks for your information/lesson on synthetic oil. I appreciate all your effort here.
Rob[/quote][size=4] My pleasure. You will also find this video from my HiTechOil YouTube channel to be of interest –> Synthetic Oil Basics from HiTechOil.com Enjoy. I have many other related video’s on my YouTube channel I think you’ll find interesting. What kind of car do you have? Contact me with any questions you have.
Take care and have a great day! 🙂 [/size]
[quote=”Rob” post=49293]Wow! Thanks for all of the good info. I knew the benefits of synthetic oil but never really knew exactly why until now. I didn’t know about the new style of rings either. Thanks for your information/lesson on synthetic oil. I appreciate all your effort here.
Rob[/quote][size=4] My pleasure. You will also find this video from my HiTechOil YouTube channel to be of interest –> Synthetic Oil Basics from HiTechOil.com Enjoy. I have many other related video’s on my YouTube channel I think you’ll find interesting. What kind of car do you have? Contact me with any questions you have.
Take care and have a great day! 🙂 [/size]
[quote=”Rob” post=49085]Hi Scott
When I took my truck in for the free oil change I asked the service manager how a brand new engine sent from the factory with synthetic oil could seat the rings properly. Engines my brother and I bult years ago the rule was always use conventional oil to seat the rings then switch to synthetic if you like. The service guy said he didn’t know the answer to that but understood what I was saying. Do you know by chance?
Thanks[/quote][size=4] I’ve been an independent AMSOIL synthetic lubricants Dealer for over 25 years and so yes, I do know, by chance. 😉
Today’s modern vehicles use a piston ring type that is comparatively soft and seats virtually the first time the engine is started. Many states now have emissions testing for vehicles and a brand new vehicle not being able to pass these tests because it’s burning oil and sending high emissions out the tailpipe, wouldn’t go over too well with consumers.
Millions of Toyota’s now come from the factory assembly lines with their engines filled with synthetic oil too. There’s so many benefits to a top quality synthetic oil; reduced maintenance costs, reduced engine wear, increased power/throttle response, reduced emissions, much easier cold winter engine starts, an internally cleaner engine, improved fuel economy, (saving more money), etc., are all distinct benefits that anyone can take advantage of. It might be silly not to take advantage of the latest technology in engine lubrication.
It’s kind of like comparing bias-ply tires with radial tires; yes they both roll down the road and the bias-play tires are, “good enough”. But only a fool wouldn’t want to take advantage of the superior performance a radial tire has vs a bias-ply tire, like longer tire life, reduced costs/saving money, superior handling, better ride, improved safety, better braking, etc.
Another aspect to the answer to your question is that most, “synthetic oils”, that you see down at auto parts stores, (and I suspect some of the O.E. vehicle branded, “synthetic oils” as well), are what is known as Group III, “synthetic oils”. These oils are merely petroleum oils subjected to more refining and they are not true Group IV PAO or Group V Ester based synthetic oils that can have a vastly greater film strength than petroleum, (Group II), and Group III, “synthetic oils”. These Group III, “synthetic oils”, also don’t share all the superior performance and protection characteristics that a true Group IV or Group V synthetic oil offers, such as superior high and low temperature performance/protection, superior heat transfer characteristics/reduced engine operating temperatures and traditional PAO/Ester based synthetic oils are totally devoid of all the naturally occurring contaminants that can’t all be refined out of a petroleum oil and this is one of the keys to understanding why PAO/Ester based synthetic oils are so superior.
Petroleum oils come from the ground and have a host of naturally occurring contaminants in them that can’t all be refined out. Waxes, asphalts, napthenes, benzynes, sulphurs, etc., remain in the finished product. So when the unknowing motorist pours this stuff into their engine, (which has its own set of problems), and these contaminants mix with blowby gases inside the engine, it creates other very nasty and corrosive acids that attack all the metal surfaces inside an engine, such as bearings, cylinder walls, gaskets and seals, etc. This is why petroleum based oils should be changed on a fairly regular basis so as to remove these accumulated contaminants. Another detracting factor to this drawback of petroleum based oils is that the additive package in the oil, (a group of chemicals a tribologist puts into the oil to help it do its job better), has to address the contaminants that are found in petroleum oils and try to counteract those contaminants. Up to about 25% of a quart of motor oil consists of its additive package.
Now with PAO/Ester based synthetic oils, its a whole different ball game! These oils are formulated in a laboratory using man-made chemicals to formulate a synthetic oil, (and here comes the huge key!), and they [u]are devoid of all the contaminants that are present in petroleum oil![/u] Your engine really likes this, because not only are contaminants not being poured into the engine with the oil change, but since there are no contaminants in the PAO/Ester based synthetic oil from the start, this means that the blowby gases from combustion inside the engine now don’t combine with contaminants to create other nasty acids and contaminants! This means the PAO/Ester based synthetic oil stays cleaner much, much longer than a petroleum oil can in its wildest dreams! For this reason, the notion that PAO/Easter based synthetic oils, “get dirty just as fast as petroleum oils do”, is totally incorrect.
On top of this, with the PAO/Ester based synthetic oils not having contaminants in them, this means the tribologist, (a fancy name for an oil chemist, Google it), can use different additive package chemicals to improve the performance of the synthetic oil instead of trying to address the shortcomings the contaminants in a petroleum oil present. This allows a PAO/Ester based synthetic oil to vastly outperform/out-protect a petroleum oil and safely last, much, much, much longer. 🙂
For more information on this, you can visit my website at –>Hi-Tech Oil and also this article on this subject is absolutely fantastic ->Synthetic Oil: Rx For Long Engine Life
I hope I’ve answered your question and then some. 🙂
[/size]