Forum Replies Created
-
Replies
-
before i go taking things apart just seeing what my problem was and if im looking in the correct spot so i dont waste time or money
before i go taking things apart just seeing what my problem was and if im looking in the correct spot so i dont waste time or money
its possible i have but it hasnt shown up till now i know it was rear ended and hit badly on the passenger side with the original owner the speedo reeds 244k but i believe im close if not past 300k and everything looks original i cant even use the grease gun on ball joints or tie rods etc. now i may be wrong im not a big import or honda guy but it was 300 bought back in june drove till now when this happened today with no real problems minus the cv axles which i dont think could cause this i moved the wheels back and forth by hand to find a general area of the problem and where the tie rod goes into i believe the steering rack it clicks and moves but not for sure dont know much about front ends im still learning
its possible i have but it hasnt shown up till now i know it was rear ended and hit badly on the passenger side with the original owner the speedo reeds 244k but i believe im close if not past 300k and everything looks original i cant even use the grease gun on ball joints or tie rods etc. now i may be wrong im not a big import or honda guy but it was 300 bought back in june drove till now when this happened today with no real problems minus the cv axles which i dont think could cause this i moved the wheels back and forth by hand to find a general area of the problem and where the tie rod goes into i believe the steering rack it clicks and moves but not for sure dont know much about front ends im still learning
Thanks i havent messed with the bleed screw yet i will
Try this some time tomorrow and hopefully it works if not
Then what and the thing the stops fluid from the heater core
Is openThanks i havent messed with the bleed screw yet i will
Try this some time tomorrow and hopefully it works if not
Then what and the thing the stops fluid from the heater core
Is openOk thanks i have places i can do it most likely
Out side i have all the tools and what i was looking
At so far it doesnt look bad i still havent inspected it
Or anything but i was looking for a engine first and
Possibly cheaper than $1500 before i make a discision
I am in an area that as long as its plated and insured
They cant do anything and not to many people care
I have a car im driving now cheap little 200 dollar nothing
But i like trucks. But i figured i would look and see if i could
Find parts that didnt cost so much if i can have it running
And driving it would be as bad for the rest ive swapped
3 engines before this and one one the same model truck
But i found engines on craigslist cheaper but we all know
You never know what your getting no matter how good it looks
I have worked on this model of truck for a long time i actually
Learned how to work on vehicles through the model
And have some parts left over from the last one like sway bar links
Ball joins etc. so the rest im not to worried about
But a price of an engine is a different story i know
You get what you pay for but if i could get cheaper
Then it would be so bad but your right with what you were saying
And i understand but the big thing i have to worry about is an engine
And i might even save more and get a bigger engine just bc
But if the rest of the truck is good then its only an engine
Im ok if it turns out to be alot more than im not buying
It and i will buy another one i also found one for like 850 that runs and
Drives but the body and interior is just trashed but could use the rest for
Parts but i was still looking i found cheaper ones than 850
But they arent 4×4 so if it turns out i need more than an engine
If i could pull it off a good parts truck it would be so bad but idk
Whats your thought on that and im learning as i go with this stuff
Im starting out so i dont know everythingOk thanks i have places i can do it most likely
Out side i have all the tools and what i was looking
At so far it doesnt look bad i still havent inspected it
Or anything but i was looking for a engine first and
Possibly cheaper than $1500 before i make a discision
I am in an area that as long as its plated and insured
They cant do anything and not to many people care
I have a car im driving now cheap little 200 dollar nothing
But i like trucks. But i figured i would look and see if i could
Find parts that didnt cost so much if i can have it running
And driving it would be as bad for the rest ive swapped
3 engines before this and one one the same model truck
But i found engines on craigslist cheaper but we all know
You never know what your getting no matter how good it looks
I have worked on this model of truck for a long time i actually
Learned how to work on vehicles through the model
And have some parts left over from the last one like sway bar links
Ball joins etc. so the rest im not to worried about
But a price of an engine is a different story i know
You get what you pay for but if i could get cheaper
Then it would be so bad but your right with what you were saying
And i understand but the big thing i have to worry about is an engine
And i might even save more and get a bigger engine just bc
But if the rest of the truck is good then its only an engine
Im ok if it turns out to be alot more than im not buying
It and i will buy another one i also found one for like 850 that runs and
Drives but the body and interior is just trashed but could use the rest for
Parts but i was still looking i found cheaper ones than 850
But they arent 4×4 so if it turns out i need more than an engine
If i could pull it off a good parts truck it would be so bad but idk
Whats your thought on that and im learning as i go with this stuff
Im starting out so i dont know everythingIts body isnt real rusty it has some but its not
To bad and i can fix it with out emptying my wallet
And it would give me something to learn on before
I go to school and i like older trucks but the reason
Why im ok with this one is it has a clean body well
For the most part and the majority of the ones i have
Found for 2 or 3k are usually rusty or arent 4×4
Or flat just not what im looking for since it has a clean
Ish body i dont mind putting money in it mechanically
But if i can go cheaper than $1500 on a motor but not
Get one that is used and have reallu no clue what shape
Its in i would be a little happier basically i want a solid engine
But trying to find one cheaper than 1500Its body isnt real rusty it has some but its not
To bad and i can fix it with out emptying my wallet
And it would give me something to learn on before
I go to school and i like older trucks but the reason
Why im ok with this one is it has a clean body well
For the most part and the majority of the ones i have
Found for 2 or 3k are usually rusty or arent 4×4
Or flat just not what im looking for since it has a clean
Ish body i dont mind putting money in it mechanically
But if i can go cheaper than $1500 on a motor but not
Get one that is used and have reallu no clue what shape
Its in i would be a little happier basically i want a solid engine
But trying to find one cheaper than 1500My main reason is the truck is at a good price
For me and i like the paint and the stuff it has and
Its more of a project truck for me lol but i like it and
Didnt know if anyone knew of a good solid 350 that
Didnt cost so freaking much and i havent bought it
Or anything so thats why im looking to see if their is
A cheaper engine out their than $1500