[Phil Cose]

Yes you are right that is another factor to consider, when I have not had clips to hand I have used a suitable sized washer and self-tapping screw.

[Phil Cose]

That’s so, I was thinking of beating it flat…No substitute for the correct tool though as I mentioned before.

[Phil Cose]

whilst I wouldn’t argue that the correct tools are the way to go ,it’s quite a walk to LA from Brisbane Australia, Also I wanted to do the job today hence the acceptable standby tool, I remove quite a few clips without damage. I couldn’t find it but somewhere I have a gardening tool just like the ones illustrated for trim, (The store you mentioned looked a useful one) If you can’t find your proper tool, these at least are useful substitutes.

http://www.in.all.biz/img/in/catalog/643577.jpeg

To cheer the day: If clairvoyants were genuine, you wouldn’t have to make appointments They would know you are coming.

[Phil Cose]

Thanks or the tip, I did eventually search with a strong light and found it wedged between a join in the splash guard tray Appreciate the comments. I get to put it through the re register test (Hail Damage) mid May.

[Phil Cose]

Yeah ain’t that the truth, in Australia its called “Burkes Law” Still haven’t found it yet. Overthehillphil

[Phil Cose]

I did mean the engine compartment. As for glowing bolts I only meant ones that are frequently removed ie battery screw caps and small 8mm bolts from body work or the like, do it prior to the work and after all safely back in place remove the aluminous paint if you wish…also luminous nail polish can be used , check out ebay they have tons of it. regards, overthehillphil

[Phil Cose]

Thank you and cap269 for your response, will check it out at the weekend. Thank you both for your assistance

[Author]

Replies