[outdoorsman310]

they will probably warp again if you get them turned.

[outdoorsman310]

how about snow mobile oil in not snowmobiles?

[outdoorsman310]

you could do a demolition derby then scrap it!

[outdoorsman310]

yes it is for the dirt bike in my picture. i wanted to save money and

[outdoorsman310]

i cleaned the throttle body on my car and it set off a cel. i never did find out the code but the idle smoothed out after some driving.

[outdoorsman310]

i repaired a starter on a generator. there was corrosion on the bolts holding it together and the mounting place. then i found out the carb had green “gas” in it and the fuel pump didnt work. i found a burnt fuse so i will change that to start.

[outdoorsman310]

well yesterday i modified the levers on my bike to a thicker bolt holding them and tightened the shifter which i had put red loctite

[outdoorsman310]

if you cant find any maybe use some weather stripping from a hardware store

[outdoorsman310]

does the fluid smell burnt?

[outdoorsman310]

only if it was way off. i am thinking its timing or fuel washed down the cylinder walls

[outdoorsman310]

i may buy a cheapo socket and weld on a flat piece for the slot.

[outdoorsman310]

im making this up but it might have something to do with traction control systems braking individual wheels.

[outdoorsman310]

purolator and napa

[outdoorsman310]

was this near the 4th of July by any chance?

[outdoorsman310]

changing the transmission fluid may help a little if its hard to get into gear also if you blip the throttle that will probably make it easier when downshifting and some people do that with old cars when shifting normally.

[Author]

Replies