Compare list 0

[tim]

cap rotor, wires like dan the man says,dont wait that baby L leave ya high n dry. been there……

[tim]

cap rotor, wires like dan the man says,dont wait that baby L leave ya high n dry. been there……

[tim]

you mite have acidently pushed air to the rears,ive had a lot of cheveys.theirs a seqence to bleeding the whole system ,i cant remember exactly what it is but generaly left front right rear {its furthest from the master cylnder} with always sense to me. left rear rite front, then repeat , then just the rears ending with the fronts .sometimes its taken me several times to here tat sound of air comin out {fritttt}. hope this helps you, but i really hope u allready got it figured out so u dont have to go through this oily proceedure

[tim]

you mite have acidently pushed air to the rears,ive had a lot of cheveys.theirs a seqence to bleeding the whole system ,i cant remember exactly what it is but generaly left front right rear {its furthest from the master cylnder} with always sense to me. left rear rite front, then repeat , then just the rears ending with the fronts .sometimes its taken me several times to here tat sound of air comin out {fritttt}. hope this helps you, but i really hope u allready got it figured out so u dont have to go through this oily proceedure

[tim]

it doesnt feel like front end,i checked the motor and trany mounts,

[tim]

it doesnt feel like front end,i checked the motor and trany mounts,

[tim]

i feel it at high speed, i replaced the upper ball joint on this truck it comes with the whole upper control arm {witch rocked my wallet by the way) .im not sure if it needs allined or not theres was no shims in it and it drives straite,even with that issue it still has the original prob. the vibration, it sure seems like a wheel bearing but like i said doesnt wiggle when on the jack, i spin the tire and it makes a scapin noise but seems like just the brake pad hitin here and there.. thanks

[tim]

i feel it at high speed, i replaced the upper ball joint on this truck it comes with the whole upper control arm {witch rocked my wallet by the way) .im not sure if it needs allined or not theres was no shims in it and it drives straite,even with that issue it still has the original prob. the vibration, it sure seems like a wheel bearing but like i said doesnt wiggle when on the jack, i spin the tire and it makes a scapin noise but seems like just the brake pad hitin here and there.. thanks

[Author]

Replies