Forum Replies Created
-
Replies
-
3/8 deep impact swivels for stubborn studs http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=740361&group_ID=674890&store=snapon-store&dir=catalog
PH3050b air hammer…because it’s the best
http://buy1.snapon.com/catalog/item.asp?P65=yes&tool=power&item_ID=739856&group_ID=682048Sent from my iPhone using Tapatalk
3/8 deep impact swivels for stubborn studs http://buy1.snapon.com/catalog/item.asp?P65=&tool=all&item_ID=740361&group_ID=674890&store=snapon-store&dir=catalog
PH3050b air hammer…because it’s the best
http://buy1.snapon.com/catalog/item.asp?P65=yes&tool=power&item_ID=739856&group_ID=682048Sent from my iPhone using Tapatalk
My name is Shawn, and I’m a newer tech. I worked on the lube rack at a GM dealership for 8 months and realized it was going nowhere, so I took an hourly job offer as an apprentice at a local independent shop. Best decision ever! After 2 months, I’ve learned a ton and I’ve replaced a 5.4 engine on a 2003 Expedition 4×4 already. Next step is to take classes at community college during nights after work and get my ASE certs.
Sent from my iPhone using Tapatalk
My name is Shawn, and I’m a newer tech. I worked on the lube rack at a GM dealership for 8 months and realized it was going nowhere, so I took an hourly job offer as an apprentice at a local independent shop. Best decision ever! After 2 months, I’ve learned a ton and I’ve replaced a 5.4 engine on a 2003 Expedition 4×4 already. Next step is to take classes at community college during nights after work and get my ASE certs.
Sent from my iPhone using Tapatalk
I’m also a fan of the M12 and M18 lines. The FUEL series is the way to go (brushless).
Here’s the good 1/2 imapct kit: http://www.milwaukeetool.com/power-tools/cordless/2763-22
Here’s the 3/8: http://www.milwaukeetool.com/power-tools/cordless/2654-22ct
The 1/2 I posted has a breakaway torque of 1,000 ft-lbs and a maximum fastening of 700.
The 3/8 goes up to 200ft-lbs.I’m also a fan of the M12 and M18 lines. The FUEL series is the way to go (brushless).
Here’s the good 1/2 imapct kit: http://www.milwaukeetool.com/power-tools/cordless/2763-22
Here’s the 3/8: http://www.milwaukeetool.com/power-tools/cordless/2654-22ct
The 1/2 I posted has a breakaway torque of 1,000 ft-lbs and a maximum fastening of 700.
The 3/8 goes up to 200ft-lbs.