Menu

Larry nagy

Forum Replies Created

Viewing 6 replies - 1 through 6 (of 6 total)
  • Author
    Replies
  • in reply to: 2003 dodge ram 1500 stops cranking #602881
    Larry nagyLarry nagy
    Participant

      Spark plugs fixed this unit. use the proper plug for this trk and check all coils, on start the were sending a voltage spike at the PCM shutting down the 5 volt signal from pcm. Hours of testing but sorry to say spark plugs fixed it but make you test coils they could do the same thing

      in reply to: 2003 dodge ram 1500 stops cranking #594854
      Larry nagyLarry nagy
      Participant

        Spark plugs fixed this unit. use the proper plug for this trk and check all coils, on start the were sending a voltage spike at the PCM shutting down the 5 volt signal from pcm. Hours of testing but sorry to say spark plugs fixed it but make you test coils they could do the same thing

        in reply to: 2003 dodge ram 1500 stops cranking #598056
        Larry nagyLarry nagy
        Participant

          2003 dodge ram stops cranking while trying to start

          in reply to: 2003 dodge ram 1500 stops cranking #590416
          Larry nagyLarry nagy
          Participant

            2003 dodge ram stops cranking while trying to start

            in reply to: 2003 dodge ram 1500 stops cranking #597940
            Larry nagyLarry nagy
            Participant

              if you leave the key on and jump 12v to the brown sol. wire starter will turn over all day motor will not start because it has lost ign signal. if you turn the switch completely off and then turn to run position then jump wire from 12V starter will work till motor starts and eveything is ok. Until you try to start wirh ign switch

              in reply to: 2003 dodge ram 1500 stops cranking #590282
              Larry nagyLarry nagy
              Participant

                if you leave the key on and jump 12v to the brown sol. wire starter will turn over all day motor will not start because it has lost ign signal. if you turn the switch completely off and then turn to run position then jump wire from 12V starter will work till motor starts and eveything is ok. Until you try to start wirh ign switch

              Viewing 6 replies - 1 through 6 (of 6 total)
              Loading…
              toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
              situs toto situs toto