Menu

musiclover2000

Forum Replies Created

Viewing 15 replies - 61 through 75 (of 78 total)
  • Author
    Replies
  • in reply to: serpentine belt replacement #453857
    musiclover2000musiclover2000
    Participant

      Thanks I’ll do that. There’s definitely a trick to those belts for first timers

      in reply to: serpentine belt replacement #453855
      musiclover2000musiclover2000
      Participant

        When installing a new belt tensioner does the new one need to be primed some how?

        The reason I ask is the new belt and tensioner is installed but theres no tension on the belt. This car actually has 2 belt designs that I wasn’t aware of. First belt

        was half inch to long I now have correct belt measured it with old belt after exchanging it from napa. I followed the belt diagram and it seems correct but I could be

        wrong. Tensioner seems fine it’s not sloppy or anything like that nice and firm.

        Any ideas is very much appreciated

        in reply to: serpentine belt replacement #453853
        musiclover2000musiclover2000
        Participant

          Thank you S:)

          in reply to: Removing rust from tools #453108
          musiclover2000musiclover2000
          Participant

            I’ve had luck soaking rusty things in vinegar. Vinegar softens it right up and most of the time it wipes off or sanding some light sand paper helps

            in reply to: monroe quick struts #449503
            musiclover2000musiclover2000
            Participant

              Thanks I may have to give them a try.

              in reply to: varnish color #456803
              musiclover2000musiclover2000
              Participant

                Thank you

                in reply to: How often to change Synthetic Oil? #447103
                musiclover2000musiclover2000
                Participant

                  Thank you

                  in reply to: How often to change Synthetic Oil? #447101
                  musiclover2000musiclover2000
                  Participant

                    Thanks for the replies. I’m not changing it at 3000 miles was just curious what others thought, and wasn’t sure if 7 months was to long.

                    in reply to: P0133 code #451602
                    musiclover2000musiclover2000
                    Participant

                      Thanks for all the replies. Looks like I’m gonna have to replace the whole pipe. A parts guy told me the exhaust is 1 7/8 in. and there not made in that size.

                      in reply to: P0133 code #451601
                      musiclover2000musiclover2000
                      Participant

                        I’ve found a few that may work. I’ve never measured exhaust pipes before are they measured by inside diameter? Would I measure the inside of the tail pipe where the muffler is?

                        Thank you

                        in reply to: P0133 code #451597
                        musiclover2000musiclover2000
                        Participant

                          Thanks. I’m defiantly going to give this a try

                          in reply to: P0133 code #451594
                          musiclover2000musiclover2000
                          Participant

                            This part is from napa for about $40.00 Could I have a shop cut the old piece out and weld or clamp this in place instead of buying the whole pipe?

                            Thank you

                            in reply to: P0133 code #451593
                            musiclover2000musiclover2000
                            Participant

                              The leak is coming from the flex pipe on that woven metal thing. I’ll have to find a torch for removing those rusty bolts.

                              Thank you for all the help

                              in reply to: P0133 code #451590
                              musiclover2000musiclover2000
                              Participant

                                I’ve gathered the evidence and it’s pointing to a exhaust leak. I compared my car with my friends hyundai. Stuck my hand over my grand am’s muffler and had a very hard time keeping it there from the pressure and no noise. The hyundai it was effortless holding my hand over it and when I did i heard a loud hissing sound. Stuck a shirt in the muffler and traced the noise some where by the exhaust manifold or possibly that gasket where the tail pipe begins.

                                This may sound kind of silly but could I use smoke bombs the kind from july 4 or have someone smoke a cigar and blow the smoke up the exhaust to locate the leak? Any ideas will be appreciated.

                                Thank you for all the help I really appreciate it

                                in reply to: P0133 code #451585
                                musiclover2000musiclover2000
                                Participant

                                  Forgot to mention it has been on for a week went away sunday came back tuesday or monday.

                                Viewing 15 replies - 61 through 75 (of 78 total)
                                Loading…
                                toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                                situs toto situs toto