[moparfan]

[quote]Quoted From CELICA XX:_x000D_
_x000D_
Like Eric stated, ceramics fill a

[moparfan]

[quote]Quoted From dreamer2355: _x000D_
_x000D_
This would start the whole experience vs certs vs book smart debate on the forums and i am not sure i want to be apart of that._x000D_
_x000D_
I think we all do a good job of politely correcting each others ‘mistakes’ as wel

[moparfan]

great info dreamer! how about kevlar? now your thinking about fabric right? think again its also used in ceramic clutchs to make a smoother take off. http://www.thoroughbreddiesel.com/valai … htm_x000D_
_x000D_
now the clutch i personally use in my tru

[moparfan]

higher CCA does not hurt a thing.

[moparfan]

ok wow what a miss informed conversation this has become! the dodge tranny people complain about is in the TRUCKS!!!! not a car so where does a claimed BS problem from truck make it to the cars? some one said ford had the best tranny?? is that why ford ma

[moparfan]

[quote]Quoted From Beefy:_x000D_
_x000D_
My Toyota Rav4 with a beast of a normally aspirated 2.0 liter 4-popper and automatic transmission is slower than some go carts I’ve driven, and the factory pads are ceramics.

[moparfan]

Quoted From CELICA XX:_x000D_
_x000D_
So much misinformation, I don’t even know where to begin!_x000D_
_x000D_
1. Eric’s advice is indeed correct_x000D_
2. You might want to read up on ceramic brakes_x000D_
_x000D_

_x000D_
_x000D_
i have and know them very well and was able to bring the

[moparfan]

i pick the longest lasting truck!! http://www.farmshow.com/view_articles.php?a_id=646 and don’t take government money and lie about it like FORD!!

[moparfan]

[quote]Quoted From EricTheCarGuy: _x000D_
_x000D_
I agree it’s likely that your front brakes are worn but you’ll need to remove the wheels and inspect them to know for sure.

[moparfan]

[quote]Quoted From EricTheCarGuy:_x000D_
_x000D_
I might have to disagree with you on this as I’ve never had that issue using ceramic pads, perhaps with some brands but I’ve never had issues with the Akebono’s that I’ve used._x000D_
_x000D_
Ceramic pads are a nice medium

[moparfan]

Eric!! i think he is trying to help change it. by reaching out to you! a person in a much better position to help on a larger scale! clearly he see’s a situation that he does not like and wants to change it. insted of sitting at home complaining to family

[moparfan]

it is hard out there for the new guys now. the pay just ant there anymore. plus you have to take in account the new higher cost of diagnostic tools like scanners and such. a good younger friend of mine is going threw the same issue right now. he worked fo

[moparfan]

ok after a little digging i did find some info claiming dodge used a few Qjets in the 80s. so i may be wrong on that. however i have never seen one with a factory installed Qjet._x000D_
_x000D_
anyways the same still apply’s. a vacuum leak at the base of the carb or

[moparfan]

i see the video and the comment as 2 different things here. comment speaking of what you will see as a entry level tech and the video talking about a lazy person that don’t want to work? plenty of entry techs work there but off just to pay school and tool

[moparfan]

[quote]Quoted From dreamer2355: _x000D_
_x000D_
Its hard for the starter techs now as so many experienced technicians are still out of work due to the economy and most of them are willing to take pay cuts now just to have a job and make ends meet. Alot of peop

[Author]

Replies