Forum Replies Created
-
AuthorReplies
-
Dont have any pictures, but will try to get a few today.
Dont have any pictures, but will try to get a few today.
:cheer: :cheer: :cheer: :cheer: Well got it running after breaking the bank and replacing everything that could possibly be replaced a $50 ECM from a junk yard got her going. Atleast it runs alot better now! From all my research it makes sense that an Accord with no spark that does not show any codes is the ECM, most everything else would throw a code. Thanks to all for your help!
:cheer: :cheer: :cheer: :cheer: Well got it running after breaking the bank and replacing everything that could possibly be replaced a $50 ECM from a junk yard got her going. Atleast it runs alot better now! From all my research it makes sense that an Accord with no spark that does not show any codes is the ECM, most everything else would throw a code. Thanks to all for your help!
Looks like its possibly the ECM got to find one.
Looks like its possibly the ECM got to find one.
Yes and its pin 20 and there is no pulse on that wire at the ecm or distributer. So is the ecm bad or the crank sensors bad. Do you know the signal wire for the crank sensor on the ecm?
Yes and its pin 20 and there is no pulse on that wire at the ecm or distributer. So is the ecm bad or the crank sensors bad. Do you know the signal wire for the crank sensor on the ecm?
OK dug into the ECM (the brain) checked the grounds going into the ECM they were good. Hooked the red lead of my LED test light to a 12v positive and the black lead to the yellow and green signal wire coming out of ecm. When you turn the switch on the LED comes on when you crank the car the light dies, it should pulse and it dont. Any body got any ideas?
OK dug into the ECM (the brain) checked the grounds going into the ECM they were good. Hooked the red lead of my LED test light to a 12v positive and the black lead to the yellow and green signal wire coming out of ecm. When you turn the switch on the LED comes on when you crank the car the light dies, it should pulse and it dont. Any body got any ideas?
Since the injectors are firing does that mean the crank sensors are working? I dont know what else to do. 🙁
Since the injectors are firing does that mean the crank sensors are working? I dont know what else to do. 🙁
Got my hopes up new relay still no spark!!!
Got my hopes up new relay still no spark!!!
Just checked main relay and one side of its burnt up. Going to go buy a new one will post the result.
-
AuthorReplies