Menu

Mike jensen

Forum Replies Created

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • Mike jensenMike jensen
    Participant

      I had this same problem in my old pontiac montana. The a/c compressor would come on for about 15 seconds and then turn off for about 60 seconds.
      I took it to an a/c specialist and it turned out that someone over charged the system.
      The shop recovered some of the refrigerant to set it at the proper level and it worked great after that.
      It was only about $100.00 to have them do the test and recovery. Money well spent imho.

      in reply to: Brake pulsation after bearing change #880975
      Mike jensenMike jensen
      Participant

        Some additional information I should have mentioned.
        The bearing and hub are all one piece. I just watched Eric’s fif video where he changed the bearing…
        I did not clean the bore where the hub fits in with sand paper or a wire brush. I just blew all the loose dirt away with an air wand.
        Would that cause it to not seat properly?
        I also did not torque the axel nut, I just put it on as tight as I could get it with a ratchet.

      Viewing 2 replies - 1 through 2 (of 2 total)
      Loading…
      toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
      situs toto situs toto