Menu

Lefont Lafonte

Forum Replies Created

Viewing 2 replies - 1 through 2 (of 2 total)
  • Author
    Replies
  • in reply to: Rewiring the Main Relay. 1990 Honda Civic LX #476567
    Lefont Lafonte
    Participant

      Hello Eric,

      I agree, but I did not know anything about cars (I do now a little)and the person who told me to do it handed me a Main Relay with the connector hooked to it and stated that all I have to do is cut and rewire it. I did that, but it did not fix anything that was wrong with the car which was a check engine light and a horrible stalling every 4-7 seconds. I will continue operating the car while on the road by closing and opening the ignition switch and it will run and the back to the stalling. My problem now is that I have no idea which wire goes to the correct slot in the connector that plugs into the Main Relay. Due to me disconnecting the incorrect Main Relay along with the connector that came with it. I need help in knowing which wire goes to what slot. I have no problem with the black, green and two blue with white stripes, but there are some yellow ones that have long interval between the white stripes but and can’t seem to match them.

      I hope this helps my explanation.

      Thank you in advance, I think you’re doing a Superb! Job by posting all this videos online for free. You’re far better mechanic than the engineers running GM labs.

      Leonides.

      in reply to: Rewiring the Main Relay. 1990 Honda Civic LX #476976
      Lefont Lafonte
      Participant

        Hello Eric,

        I agree, but I did not know anything about cars (I do now a little)and the person who told me to do it handed me a Main Relay with the connector hooked to it and stated that all I have to do is cut and rewire it. I did that, but it did not fix anything that was wrong with the car which was a check engine light and a horrible stalling every 4-7 seconds. I will continue operating the car while on the road by closing and opening the ignition switch and it will run and the back to the stalling. My problem now is that I have no idea which wire goes to the correct slot in the connector that plugs into the Main Relay. Due to me disconnecting the incorrect Main Relay along with the connector that came with it. I need help in knowing which wire goes to what slot. I have no problem with the black, green and two blue with white stripes, but there are some yellow ones that have long interval between the white stripes but and can’t seem to match them.

        I hope this helps my explanation.

        Thank you in advance, I think you’re doing a Superb! Job by posting all this videos online for free. You’re far better mechanic than the engineers running GM labs.

        Leonides.

      Viewing 2 replies - 1 through 2 (of 2 total)
      Loading…