Untitled | EricTheCarGuy

Forum Replies Created

Viewing 15 replies - 1 through 15 (of 66 total)

1 2 3 4 5 →

Author

Replies
January 13, 2014 at 10:38 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #568362
Chris
Participant
Ok…found the issue with my truck..it turned out to be my “ecm” computer..it was bad so I replaced it an now im back in business
January 13, 2014 at 10:38 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #574837
Chris
Participant
Ok…found the issue with my truck..it turned out to be my “ecm” computer..it was bad so I replaced it an now im back in business
January 8, 2014 at 5:47 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #567319
Chris
Participant
What numbers do I need to match up when buying a PCM..I found one but 2 of the 5 group of numbers match..will this work, keep in mind that the replacement PCM is coming out of the same model as my truck and also comming from a at like mine
January 8, 2014 at 5:47 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #573692
Chris
Participant
What numbers do I need to match up when buying a PCM..I found one but 2 of the 5 group of numbers match..will this work, keep in mind that the replacement PCM is coming out of the same model as my truck and also comming from a at like mine
January 1, 2014 at 7:40 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #566352
Chris
Participant
i swapped a couple relay’s around with the asd relay and still got nothing…when i did a continuity check on the asd relay it showed to be fine
January 1, 2014 at 7:40 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #572660
Chris
Participant
i swapped a couple relay’s around with the asd relay and still got nothing…when i did a continuity check on the asd relay it showed to be fine
January 1, 2014 at 7:38 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #566349
Chris
Participant
how do i check for a cranks signal?
January 1, 2014 at 7:38 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #572657
Chris
Participant
how do i check for a cranks signal?
December 30, 2013 at 3:19 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #565897
Chris
Participant
Iv looked for the wireing diagram an have not been able to find one..anybody got a diagram that they can post please??
December 30, 2013 at 3:19 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #572195
Chris
Participant
Iv looked for the wireing diagram an have not been able to find one..anybody got a diagram that they can post please??
December 21, 2013 at 4:57 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #564403
Chris
Participant
December 21, 2013 at 4:57 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #570674
Chris
Participant
December 21, 2013 at 4:56 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #564401
Chris
Participant
Ok guys..I need some help here….this is my fuel system relay…by looking at this pic…which prongs would I need to use to make my fuel pump continuously run..this is just for testin purposes only
December 21, 2013 at 4:56 am in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #570671
Chris
Participant
Ok guys..I need some help here….this is my fuel system relay…by looking at this pic…which prongs would I need to use to make my fuel pump continuously run..this is just for testin purposes only
December 15, 2013 at 8:32 pm in reply to: 97 Ram 15 4×4 5.9 “360”…Engine issues… #563025
Chris
Participant
Im at a loss with this fuel pump issue…the pump is new an has no power hoing to it…dors the 97 dodges have “safty relays” like the fords..if so..where would it be located?
Author

Replies

Viewing 15 replies - 1 through 15 (of 66 total)

1 2 3 4 5 →

Chris

Forum Replies Created

Navigation

Contact Us