[Richard brelsford]

well i think i fixed that problem, i ended up replace distributor and the gasket in between the carb spacer and intake

[Richard brelsford]

well i think i fixed that problem, i ended up replace distributor and the gasket in between the carb spacer and intake

[Richard brelsford]

well pulled distributor and its really rusty inside and one of the teeth have a crack in it so i think i found my problem

[Richard brelsford]

well pulled distributor and its really rusty inside and one of the teeth have a crack in it so i think i found my problem

[Richard brelsford]

ok ill have to see if i can rent or barrow a vacuum gun to test it

[Richard brelsford]

ok ill have to see if i can rent or barrow a vacuum gun to test it

[Richard brelsford]

i know where it is and how to hook it up to my carburetor

[Richard brelsford]

i know where it is and how to hook it up to my carburetor

[Richard brelsford]

i have check vacuum with smoke and its not a vacuum leak, i have checked firing order 3 different times, i still need to do a compression test but i want to make sure its not something easy, hot do i tell if its my distebator or not it have a vacuum advance on it

[Richard brelsford]

i have check vacuum with smoke and its not a vacuum leak, i have checked firing order 3 different times, i still need to do a compression test but i want to make sure its not something easy, hot do i tell if its my distebator or not it have a vacuum advance on it

[Richard brelsford]

i have done a power balance test nothing changed the vacuum lines are connected right the all have been replaced

[Richard brelsford]

i have done a power balance test nothing changed the vacuum lines are connected right the all have been replaced

[Author]

Replies