Forum Replies Created
-
Replies
-
So i replaced my trans it only took a day but now Ive ran into another issue i know this will not sound right but hey were all human. i put the trans in my car from a DX not an EX if you know any way around the input speed shaft sensor problems please let me know i have been told i have to replace it which i may but if any of you gear heads read this and know what i am talking about please hmu because id really love to have a loop hole around this…..i have an input shaft speed sensor code and no TTC input and its because there is one more tooth one this trannys ring gear on the inside…than the orignal tranny
So i replaced my trans it only took a day but now Ive ran into another issue i know this will not sound right but hey were all human. i put the trans in my car from a DX not an EX if you know any way around the input speed shaft sensor problems please let me know i have been told i have to replace it which i may but if any of you gear heads read this and know what i am talking about please hmu because id really love to have a loop hole around this…..i have an input shaft speed sensor code and no TTC input and its because there is one more tooth one this trannys ring gear on the inside…than the orignal tranny
yup i sure did and when i bought the car it didn’t have any tranny fluid in it the cooler lines were loose so tightened them and i put Honda fluid in it but i also added a quart of Lucas tranny conditioner too so that why i changed it yesterday all over on here i noticed if you use anything other than Honda it can effect the shifting of a Honda trans and the magnet in the plug didn’t really seem to be overloaded with metal so im hoping that’s what was wrong. i will keep yous posted one other thing i watched the clip about pulling codes without a scan tool and i cant seem to find that 2 pin plug any advise i just wanted to see if it had a code for the trany.
yup i sure did and when i bought the car it didn’t have any tranny fluid in it the cooler lines were loose so tightened them and i put Honda fluid in it but i also added a quart of Lucas tranny conditioner too so that why i changed it yesterday all over on here i noticed if you use anything other than Honda it can effect the shifting of a Honda trans and the magnet in the plug didn’t really seem to be overloaded with metal so im hoping that’s what was wrong. i will keep yous posted one other thing i watched the clip about pulling codes without a scan tool and i cant seem to find that 2 pin plug any advise i just wanted to see if it had a code for the trany.
yes i checked the fluid level and it was good i changed it with new fluid yesterday haven’t driven it enough yet to see if it changed anything will know mon