Forum Replies Created
-
Replies
-
I already replaced the fuel pump with a denso. No first click, only thing left is the main relay then? I tried shooting starter fluid into the intake but still no start. I changed the cap and rotor and the wires spark.
I already replaced the fuel pump with a denso. No first click, only thing left is the main relay then? I tried shooting starter fluid into the intake but still no start. I changed the cap and rotor and the wires spark.
Woops I misdiagnosed the fuel pressure, I’m actually getting no pressure so that should explain no first click. I checked main relay and all the solders look fine.
Woops I misdiagnosed the fuel pressure, I’m actually getting no pressure so that should explain no first click. I checked main relay and all the solders look fine.
Just in case I also checked fuel pressure and its there so fuel should be good.
If I don’t hear the first click when I turn the key to the 1 position then its a relay problem?
Just in case I also checked fuel pressure and its there so fuel should be good.
If I don’t hear the first click when I turn the key to the 1 position then its a relay problem?
Since there was no spark at the distributor wires I thought replacing the rotor and cap will work and I did that a few minutes ago and still nothing. I don’t know how to check the main relay and igniter. You said to listen to clicks, On position 2 I definitely hear the fuel pump and the click after. No click when the key is turned to the 1 position.
Distributor coil has spark so that should be good.
Since there was no spark at the distributor wires I thought replacing the rotor and cap will work and I did that a few minutes ago and still nothing. I don’t know how to check the main relay and igniter. You said to listen to clicks, On position 2 I definitely hear the fuel pump and the click after. No click when the key is turned to the 1 position.
Distributor coil has spark so that should be good.
Alright so the distributor coil still ignites but the end of the wire where the spark plug goes on does not.
Does that mean the cap and rotor is bad?