[John]

Fixed. Had to pull the entire engine harness and dizzy then went to town with contact cleaner……cleaned every connection. Runs like new . Full power ect. Thanks.

[John]

Bump. Need somw help. Surely someone here has seen this problem before.

[John]

Video is up

[John]

Im uploading a video. I will post when its done uploading. Im not seeing Compression being an issue. Belt is tight.

[John]

Also I have unplugged the TPS and reset the ECU to rule out a possible TPS issue. Car ran the same regardless if TPS is plugged in or not just get a cell for TPS.

[John]

I was in a jam one time and it was like 3am ……had to replace the inner tie rods with no tool. I tack welded the 2 pieces together at the joint and then just unscrewed it from the end. You could also jam a screw driver in the joint.

[John]

If it where me I would jump the connector for the fan and make sure its ceased. I have had success in the past with bending those condensers back out…just take your time and if its not leaking I would not replace it. Just replace the fan if its bad and call it a day.

[Author]

Replies