Menu

dodgeguy82

Forum Replies Created

Viewing 15 replies - 1 through 15 (of 36 total)
  • Author
    Replies
  • in reply to: misfire at idle #588731
    dodgeguy82dodgeguy82
    Participant

      i found the intake manifold leak and its fixed and it runs great with no misfire

      Attachments:
      in reply to: misfire at idle #581853
      dodgeguy82dodgeguy82
      Participant

        i found the intake manifold leak and its fixed and it runs great with no misfire

        Attachments:
        in reply to: misfire at idle #587657
        dodgeguy82dodgeguy82
        Participant

          How whould i check for vacuum leak at the intake manifold i dont hear any sould like a leak around the manifold

          in reply to: misfire at idle #580734
          dodgeguy82dodgeguy82
          Participant

            How whould i check for vacuum leak at the intake manifold i dont hear any sould like a leak around the manifold

            in reply to: misfire at idle #587503
            dodgeguy82dodgeguy82
            Participant

              I forgot i put new coil on and checked all vacuum lines plugs are gaped to factory spec.

              in reply to: misfire at idle #580595
              dodgeguy82dodgeguy82
              Participant

                I forgot i put new coil on and checked all vacuum lines plugs are gaped to factory spec.

                in reply to: would mustang 3.8L headers work on 4.2L f150 #478071
                dodgeguy82dodgeguy82
                Participant

                  my truck is a 1997 and i been looking at headers for a mustang 1998-2000 and look they look the same

                  in reply to: would mustang 3.8L headers work on 4.2L f150 #478526
                  dodgeguy82dodgeguy82
                  Participant

                    my truck is a 1997 and i been looking at headers for a mustang 1998-2000 and look they look the same

                    in reply to: Coil pack #461061
                    dodgeguy82dodgeguy82
                    Participant

                      update i found and fix the crank no start

                      in reply to: Coil pack #461059
                      dodgeguy82dodgeguy82
                      Participant

                        i didnt check the crank sensor i’ll check that when i get a new starter to day

                        in reply to: Coil pack #461055
                        dodgeguy82dodgeguy82
                        Participant

                          update i went to start the truck to day and the starter froze so im gona

                          in reply to: Coil pack #461057
                          dodgeguy82dodgeguy82
                          Participant

                            Quoted From rice400: _x000D_
                            _x000D_
                            maybe the starter was drawing too many amps and was causing your no start

                            _x000D_
                            _x000D_
                            the starter was fine yesterday but when i went to start it to day it froze up _x000D_

                            in reply to: Coil pack #461049
                            dodgeguy82dodgeguy82
                            Participant

                              _x000D_
                              _x000D_
                              _x000D_
                              _x000D_
                              _x000D_
                              they all looked the same i think is normal but not sure

                              in reply to: Coil pack #461050
                              dodgeguy82dodgeguy82
                              Participant

                                [quote]Quoted From EricTheCarGuy: _x000D_
                                _x000D_
                                Keep in mind it could also be the ignition module causing the problem so be sure to check for a signal at the coil negative connection first to determine if it’s getting a signal or not.

                                in reply to: Coil pack #461045
                                dodgeguy82dodgeguy82
                                Participant

                                  [quote]Quoted From sam_priem: _x000D_
                                  _x000D_
                                  check all the wires going to the coil, plug wires, and plugs.

                                Viewing 15 replies - 1 through 15 (of 36 total)
                                Loading…
                                toto togel situs toto situs toto