[anthony]

can you give me the link. I really need to get this fixed asap!!! it driving me crazy already

[anthony]

ok I will do that now the vent ports are located in the booster correct cause my MC has two lines going out to a proportioning valve then from there to all 4 brakes. my understanding is that this valve mainly supports the rear brake shoes correct. so by adjusting the brake pedal height might correct my problem and how will I know when and if its correct do I need to test it everytime I adjust it

[anthony]

no squirting of fluid at all, re bleed the brakes and no problem there fluids flowing just fine. took a look at the manual and it says the brake pedal should be 6in. from floor when I check my pedal is only 4 in from floor could this be the culprit. I replaced the booster and master cylinder when I replaced the motor last year also, vent ports????? thanks

[anthony]

I am open to all possibilities gone take off the master cylinder and take a look at it this weekend. I checked the booster for leaks and all vacuum lines not a single leak anywhere. stumpped

[anthony]

thanks I will try that. its something applying pressure to the calipers so im thinking booster or master cylinder, they were both replaced a year ago.

[Author]

Replies