[Eddie]

Ttt

[Eddie]

Just took the cam covers off just to make sure .. Crank is aligned as well

I did make some dings on the cam sensor .. Could this be the problem ? ( just put new cam sensors , still same problem )

Attachments:

• image.jpeg
• image-2.jpeg

[Eddie]

Hey Eric thanks a bunch for the reply .. So there’s no special cam holder I can purchase? I already have the crank pulley holder .. I need the one for the cam pulleys .. Unfortunately I already have the belt off and the engine is inside the vehicle so I can’t put a impact on the rear cam … I put uv inside the oil .. I replaced every gasket and its def comming from both cam seals .. A lot more on the rear cam seal .. I’ll post some pics

Attachments:

• image.jpg
• image.png

[Author]

Replies