[Donnie]

hi sam another question what grade oil should i put in my new crate engine for initial start up and break in that same mechanic that TOLD me 20 degrees also told me that valvoline 20/50racing oil vr1 high in zink is what i should use he also showed me zink additives to add to other oil low in zink i really would like to hear from you what you recomend thanks so much for helping me in these matters i really appreciate your advice 🙂 :dry: :S i just read my owners manual and they recommend 10w-30 SAE all handled sam thanks again!!!! 🙂 🙂 🙂

[Donnie]

thanks all in and went pretty easy age and 4th time around helped especially liked all the wire plugs convenient just need to finnish radiator assembly and clutch fan and lube and check rails for leaks feel pretty confident step one no plugs no spark no fuel and lube new engine a few times step two check for leaks in rails assembly none great now put in spark plugs, Plug in injecters and plug in distributer now fire it up with distributer as close as possible line up #1 tower to to roter TDC on combust stroke snug bolt and fire it up use a DRB scan tool and lock down distributer now let it run a while watching radiator fluid levels and for leaks once all doors have been opened and no leaks begin break in period as long as i lock down distributer computer will take over from settings already programmed or does that need adjusted if thats true i wuold need a mechanic with 2nd gen knowledge and tools correct thats a tool i need to learn for my truck you have been extremley HELPFULL and i really appreciate it this engine means alot to me my lively hood thanks again and i will for sure!!!!!!!!! :side: MY first dodge engine 😛

[Donnie]

thanks all in and went pretty easy age and 4th time around helped especially liked all the wire plugs convenient just need to finnish radiator assembly and clutch fan and lube and check rails for leaks feel pretty confident step one no plugs no spark no fuel and lube new engine a few times step two check for leaks in rails assembly none great now put in spark plugs, Plug in injecters and plug in distributer now fire it up with distributer as close as possible line up #1 tower to to roter TDC on combust stroke snug bolt and fire it up use a DRB scan tool and lock down distributer now let it run a while watching radiator fluid levels and for leaks once all doors have been opened and no leaks begin break in period as long as i lock down distributer computer will take over from settings already programmed or does that need adjusted if thats true i wuold need a mechanic with 2nd gen knowledge and tools correct thats a tool i need to learn for my truck you have been extremley HELPFULL and i really appreciate it this engine means alot to me my lively hood thanks again and i will for sure!!!!!!!!! :side: MY first dodge engine 😛

[Donnie]

awsome thanks again thats why i come here first i will definately lookj into a shop whos aware of this i also may know someone with exp and the right tools THANKS AGAIN!!!!

[Donnie]

awsome thanks again thats why i come here first i will definately lookj into a shop whos aware of this i also may know someone with exp and the right tools THANKS AGAIN!!!!

[Donnie]

99 dodge 1500 slt larrame

[Donnie]

99 dodge 1500 slt larrame

[Donnie]

its actualy a new crate engine rebuilt complete with intake and sims tested the exact match of what i pulled…I got it from s&j engines….THANKS I REALLY APPRICIATE IT..

[Donnie]

its actualy a new crate engine rebuilt complete with intake and sims tested the exact match of what i pulled…I got it from s&j engines….THANKS I REALLY APPRICIATE IT..

[Donnie]

its the exact same engine 360 magnum 5.9 gas thanks a mechanic told me 20 deg what do you recomend i seen a great vid guy said set your dial to advanced setting then have your light hit tdc easy i value your thoughts on this THANKS…..

[Donnie]

its the exact same engine 360 magnum 5.9 gas thanks a mechanic told me 20 deg what do you recomend i seen a great vid guy said set your dial to advanced setting then have your light hit tdc easy i value your thoughts on this THANKS…..

[Donnie]

yes it was for one night driveway is pitched and was jacked up thanks for your feedback i really appreciate it :silly:

[Donnie]

yes it was for one night driveway is pitched and was jacked up thanks for your feedback i really appreciate it :silly:

[Donnie]

i would love to win a premium that would make my day moter came out pretty easy would love to see it go back in just as easy IM ALL IN STAY DIRTY MASTER JEDI !!!!!!!!!OVER HERE PLEASE… :woohoo: :whistle: 😛 B) banana:

[Donnie]

i would love to win a premium that would make my day moter came out pretty easy would love to see it go back in just as easy IM ALL IN STAY DIRTY MASTER JEDI !!!!!!!!!OVER HERE PLEASE… :woohoo: :whistle: 😛 B) banana:

[Author]

Replies