Forum Replies Created
-
AuthorReplies
-
Could it be the fuel filter, don’t think it has ever been changed, could it be that or does the distributor sound like the culprit. mechanic said the distributor wasn’t producing enough spark. Cap and rotor were replaced previous. Please Help
It turned out to be a crankshaft position sensor, I started getting a P0335, The car would not start after that. replaced the sensor been running fine since replacement
I took it to mechanic they told it needed a distributor. Any input would be greatly appreciated
I am sorry, was misled by saying the fans kept switching on. I found the real problem is the compressor clutch keeps engaging when hot. please help!!! I don’t have any gauges,but the simple gauge that came with the refrigerant kit I got. I wouldn’t think about working on the system, but if it is something I can fix great
I am sorry, was misled by saying the fans kept switching on. I found the real problem is the compressor clutch keeps engaging when hot. please help!!! I don’t have any gauges,but the simple gauge that came with the refrigerant kit I got. I wouldn’t think about working on the system, but if it is something I can fix great
Just grasping at straws if radiator temp stays around 200 F I have had trouble with the thermostat before. The car acts flunky like they do when they are about to overheat, multiple symptoms. The air turns warm, idle lowers to about 600 rpm, the engine seems to hesitate.
Does the Acura Integra B18b1 have a spot to bleed the cooling system?
Just grasping at straws if radiator temp stays around 200 F I have had trouble with the thermostat before. The car acts flunky like they do when they are about to overheat, multiple symptoms. The air turns warm, idle lowers to about 600 rpm, the engine seems to hesitate.
Does the Acura Integra B18b1 have a spot to bleed the cooling system?
Could it be the fan control unit if the Integra has one?
Could it be the fan control unit if the Integra has one?
I all ready went though the video and that link? I am at an impasse with this everything seems to be working most of the time.
I all ready went though the video and that link? I am at an impasse with this everything seems to be working most of the time.
Yes the fans turn on and stay on. Added refrigerant recently R134
Yes the fans turn on and stay on. Added refrigerant recently R134
Thanks for every bodies input I am going to try the upstream O2 sensor. see what happens then
Thanks for every bodies input I am going to try the upstream O2 sensor. see what happens then
-
AuthorReplies