Forum Replies Created
-
Replies
-
well got a new harness found on pos and neg side 1 thin wiring missing on each one. was told I thing thats wrong because have it wired one side won’t work right while running but turn off it works right i’m talking about signal and 1 running light not lighting either way but other side works but running turns it flasher or warning flashers could this be a ground?
If you are back in my area let us know we might even put you up a couple of night got a couple of spare rooms LOL. As far as the 300 ccs we hold 60 mph all day been up to 70 did not feel comfortable at that speed with large trucks going by. Ice Bear is very poplar on west coast here got to go happy riding
By the way the reason you see 3 trikes dealer had a 2013 for 1,700 couldn’t say no nice to have a extra because while I service 1 still can go for a ride when some one comes over and says ready to ride you bet. Here in East TN weather is great most of year had red 8 months 3,600 miles 2013 white 3,000 the 1 ride the other white 1,000 mile my spare. others white one have less then 6 months.
By the way I order this red one for myself thinking my wife would ride with me ,well long story short she took it for a ride came home and asked me when I was getting one LOL So that’s how it started
I started riding at the age 65 got 3 Ice Bear trikes my wife got hers and I got mine.
These are china bikes for I could not afford a HD trike these trikes were 4,200 each shipped to home compared to 1 HD for 37,000 and have a lot of fun riding in the smoky mountains with my wife we are a team for 46 years and counting LOL.
I had some what the same problem when I dropped the tank and looked inside I found fuel pump had a rubber hose which lowered into a deeper part of tank and at end of rubber hose was a filter sock. Now saying that that exit end of filter the rubber hose fell off with the sock which means the fuel needed more then if the hose was attached with filter sock. But then again mine wasn’t a Chrysler 😳
My wife and I started riding Ice Bear Trike only 300cc gets 75mpg they are a china bike and for 4,200 each send to home not really bad. We been riding 5 months 3,000 mile only problem we had was exhaust header bolts keep coming off. I just ordered stage 8 locking nuts and they solved my problems I expect more riding then wrenching this spring. These are really cool each nut has a slot cut around it for a e clip just tighten nut slide on locking bar and snap on e clip to hold on lock in place . They have nuts and bolts a great problem solver for sure . :cheer: :S B)
Well we have it back now with 30 plus hours all systems are fixed and are doing great. Steering has been improved,cold start fixed,blades stay on,newer and better carburetor, charger system which wasn’t up to par keeping it’s own batters up to snuff like it’s 48 volt hybrid system and it’s starting 12 volt is good. It has a rack and pinon steering system. It seems the engine was a coned Honda which was a major problem to it’s resale back on market so them made some changes like a bigger better carb,and air filter housing and a few small other changws but all in all I will give it a A plus. After 30 hours oil change no oil loss and since it has no belts pulleys,tension pulleys banana: not much to go wrong less service needed.
Well we have it back now with 30 plus hours all systems are fixed and are doing great. Steering has been improved,cold start fixed,blades stay on,newer and better carburetor, charger system which wasn’t up to par keeping it’s own batters up to snuff like it’s 48 volt hybrid system and it’s starting 12 volt is good. It has a rack and pinon steering system. It seems the engine was a coned Honda which was a major problem to it’s resale back on market so them made some changes like a bigger better carb,and air filter housing and a few small other changws but all in all I will give it a A plus. After 30 hours oil change no oil loss and since it has no belts pulleys,tension pulleys banana: not much to go wrong less service needed.
Well I need to ad some information on the Lowe’s Raven. ! it was taken back because it had may small problems some not to small like blades were falling of,charge system no doing it job,steering really tight. Well now they call it the Raven 7100 and it’s the cats ass if flys turns great,faster then before, It has only a 46 in cut but the speed is really fast it make up for cutting size. Now the turn is much sharper comes close to my zero turn, Also I think it was taken out of market because it ad a clone Honda engine and Honda did go for that. They made changes like carburetor I think it even was better now then before it had a cold start problem but the speed come up big time now. I only got 15 hours on it but tat is because it only records while motor is running I drive it on the hysbred side in electric mode saves a lot of gas. Only thing it is a big toy with no belts bearing and shafts and tensors to go bad just fun time because it turn into a low end ATV which will got to 20 plus mph. :cheer: 😆 banana:
Well I need to ad some information on the Lowe’s Raven. ! it was taken back because it had may small problems some not to small like blades were falling of,charge system no doing it job,steering really tight. Well now they call it the Raven 7100 and it’s the cats ass if flys turns great,faster then before, It has only a 46 in cut but the speed is really fast it make up for cutting size. Now the turn is much sharper comes close to my zero turn, Also I think it was taken out of market because it ad a clone Honda engine and Honda did go for that. They made changes like carburetor I think it even was better now then before it had a cold start problem but the speed come up big time now. I only got 15 hours on it but tat is because it only records while motor is running I drive it on the hysbred side in electric mode saves a lot of gas. Only thing it is a big toy with no belts bearing and shafts and tensors to go bad just fun time because it turn into a low end ATV which will got to 20 plus mph. :cheer: 😆 banana:
Myself I found valve cover gaskets would leak all the way around engine then down to the pan good luck
Myself I found valve cover gaskets would leak all the way around engine then down to the pan good luck
Well I have a 03 Saturn L200 wagon 2.2 4 speed automatic and a 03 vue with a 3.0 5 speed AWD automatic both are great cars. The wagon gets 29.8 mpg around town and the vue gets 23.4. I was into restoring a 57 chevy belair and a 63 chevy SS convertible turn out great. Before I became disable I was a machinist and trouble shooter guess it’s in my blood , when I hear it won’t work I need to know why and what it needs to done to fix it. I bid on one on e bay for cheep I guess I need a real challenge. :silly: 🙂
Well I have a 03 Saturn L200 wagon 2.2 4 speed automatic and a 03 vue with a 3.0 5 speed AWD automatic both are great cars. The wagon gets 29.8 mpg around town and the vue gets 23.4. I was into restoring a 57 chevy belair and a 63 chevy SS convertible turn out great. Before I became disable I was a machinist and trouble shooter guess it’s in my blood , when I hear it won’t work I need to know why and what it needs to done to fix it. I bid on one on e bay for cheep I guess I need a real challenge. :silly: 🙂
