Forum Replies Created
-
AuthorReplies
-
September 25, 2013 at 3:42 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #551239
I’ve been looking for something showing sensor locations, can’t find much, but here are some pictures, again on the firewall side on drivers side on block.
September 25, 2013 at 3:42 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #546377I’ve been looking for something showing sensor locations, can’t find much, but here are some pictures, again on the firewall side on drivers side on block.
September 25, 2013 at 12:45 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #551161I will try again, will try to put more lite on it this time. I have a mechanic i trust, but like most everybody else $$ right now. would like to replace fuel filter but its by passenger rear wheel(good place to put it) all rusted and is 85.00$. thanks
September 25, 2013 at 12:45 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #546281I will try again, will try to put more lite on it this time. I have a mechanic i trust, but like most everybody else $$ right now. would like to replace fuel filter but its by passenger rear wheel(good place to put it) all rusted and is 85.00$. thanks
September 24, 2013 at 4:28 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #550963maf.map. arent they the same, i cleaned it, it did seem to run better at first, but this is a reoccuring theme, replacing it fri. I also read about crank and cam sensor, was looking on the fire wall side of the motor and there is two sensors, one is plugged in and the other has no wires to the sensor. i found a wire on the harness, there was one wire by it self, its for a flat male pin which the ??? sensor has two, of the two sensors its closer to the rear of the motor any ideas. thank you…
September 24, 2013 at 4:28 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #546159maf.map. arent they the same, i cleaned it, it did seem to run better at first, but this is a reoccuring theme, replacing it fri. I also read about crank and cam sensor, was looking on the fire wall side of the motor and there is two sensors, one is plugged in and the other has no wires to the sensor. i found a wire on the harness, there was one wire by it self, its for a flat male pin which the ??? sensor has two, of the two sensors its closer to the rear of the motor any ideas. thank you…
September 24, 2013 at 1:03 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #550875There is no MAF for this year, i’ve been trying to reset the ECM, by all accounts i’m told it’s in the center counsel, but i find the wiring harness but don’t see it, it looks like its under hood on drivers side ?
Attachments:September 24, 2013 at 1:03 am in reply to: 98 mitsubishi eclipse 2.0. error codes p0171/p0301 #546088There is no MAF for this year, i’ve been trying to reset the ECM, by all accounts i’m told it’s in the center counsel, but i find the wiring harness but don’t see it, it looks like its under hood on drivers side ?
Attachments:September 23, 2013 at 12:47 am in reply to: 1994 Cadillac Deville holds pressure but overheats #550675do you have heat when turned on and is it hot.
September 23, 2013 at 12:47 am in reply to: 1994 Cadillac Deville holds pressure but overheats #545921do you have heat when turned on and is it hot.
i would go to salvage yard and find one with a key, cheaper and quicker, prob. hardly use a key.
i would go to salvage yard and find one with a key, cheaper and quicker, prob. hardly use a key.
no fans wont change mpg but maf will if you have one, need info on car…
no fans wont change mpg but maf will if you have one, need info on car…
-
AuthorReplies