[clmjohn]

I’ve wiggled all the hose’s and nothing. I use both propane bottle and acty and no difference in RPM. I moved it all around intake, throttle body, all hose’s in area, around the MAF, everywhere and nothing. I’m lost. i will recheck all my connections. HELP!!!!

[clmjohn]

The problem started right after I cleaned the filter and wiped down the throttle body. ( I originally wiped the throttle body down (inside of it)) It’s been like this ever since. I did find out that I dont have a IAC valve. the ivtec has drive by wire. No I’m really lost. Any body think I could have damaged the throttle body when I removed and cleaned it? I did move the the butterfly back and forth to clean it. Any ideas?

[clmjohn]

I’ve tried all the suggestions and still the same. When I took of the throttle body I replaced the gasket with a new one. I’ve checked every hose, disconnected and reconnected every plug, removed air filter, replaced the air filter, and still nothing. I’m ordering a new MAF hopefully that takes care of it. Any more ideas???? If the new MAF dosent work then it’s off to the blood sucking dealer. HELP!!!!!!

[clmjohn]

Wait still don’t know where the IAC is on this Vtec engine. Any help one this one?

[clmjohn]

Where is the IAC located on the VTECH engine?

[clmjohn]

I cleaned the thorttle body with throttle body cleaner and the sensor with MAF cleaner. Yes I pushed open the the plate when I cleaned it. I noticed that it really never closed all the way. I take it I wasn’t suppost to?

[clmjohn]

Also checked every where for vacuum leaks. I sprayed the TB cleaner all around the hoses the intake every where but couldn’t get it to do anything.

[Author]

Replies