Untitled | Page 8 | EricTheCarGuy

Forum Replies Created

Viewing 15 replies - 106 through 120 (of 131 total)

← 1 2 3 … 7 8 9 →

Author

Replies
November 16, 2012 at 2:55 am in reply to: Vacuum gauge hook up #477506
chevyaz
Participant
Ok I hooked up the vacuum gauge at the pcv port off the tbi and got a reading of 15 and then it went to right in the middle of 15 and 16 and it did not jump around at all. It was solid right in the middle of 15 and 16. My truck is a 94 GMC silverado with a 350 5.7 and has about 295,000 miles on it YES I know the end coming soon but what am I looking at with this reading? Truck still runs great.Thanks
November 9, 2012 at 10:49 pm in reply to: Battery Corrosion Tip #475607
chevyaz
Participant
Thats a good tip thanks for shareing.
November 9, 2012 at 10:49 pm in reply to: Battery Corrosion Tip #475951
chevyaz
Participant
Thats a good tip thanks for shareing.
November 8, 2012 at 7:06 am in reply to: oil cooler line replacement #475236
chevyaz
Participant
The ones that go into the oil filter. Right side of the rad
November 8, 2012 at 7:06 am in reply to: oil cooler line replacement #475608
chevyaz
Participant
The ones that go into the oil filter. Right side of the rad
November 7, 2012 at 10:04 pm in reply to: Vacuum gauge hook up #475009
chevyaz
Participant
Just want to check the health of my engine.
November 7, 2012 at 10:04 pm in reply to: Vacuum gauge hook up #475331
chevyaz
Participant
Just want to check the health of my engine.
November 6, 2012 at 3:43 am in reply to: obd1 codes on chevy #474471
chevyaz
Participant
My bad Eric no codes came up all good. It is pretty cool that a wire does all that. Wish I would have learned that a long time ago. Thanks again.SD
November 6, 2012 at 3:43 am in reply to: obd1 codes on chevy #474728
chevyaz
Participant
My bad Eric no codes came up all good. It is pretty cool that a wire does all that. Wish I would have learned that a long time ago. Thanks again.SD
November 3, 2012 at 5:58 am in reply to: Pre Fill Oil Filters? #473790
chevyaz
Participant
i have been pre filling my filters for years just for that reason.
November 3, 2012 at 5:58 am in reply to: Pre Fill Oil Filters? #474079
chevyaz
Participant
i have been pre filling my filters for years just for that reason.
November 3, 2012 at 5:52 am in reply to: obd1 codes on chevy #473788
chevyaz
Participant
Put the jumper wire in and all I got was a code 12 3 times so no worries. I tried a paper clip 1st but didnt work so I got the wire and bingo. Thanks again forum.
November 3, 2012 at 5:52 am in reply to: obd1 codes on chevy #474078
chevyaz
Participant
Put the jumper wire in and all I got was a code 12 3 times so no worries. I tried a paper clip 1st but didnt work so I got the wire and bingo. Thanks again forum.
October 25, 2012 at 12:34 am in reply to: obd1 codes on chevy #471474
chevyaz
Participant
Ok thanks alot will do. I plan on buying a code reader they are handy to have.I never new it was so easy to get codes until I saw the Video Eric made.Thanks Eric! Plus I would rather do it myself than have the parts guy do it.
October 25, 2012 at 12:34 am in reply to: obd1 codes on chevy #471700
chevyaz
Participant
Ok thanks alot will do. I plan on buying a code reader they are handy to have.I never new it was so easy to get codes until I saw the Video Eric made.Thanks Eric! Plus I would rather do it myself than have the parts guy do it.
Author

Replies

Viewing 15 replies - 106 through 120 (of 131 total)

← 1 2 3 … 7 8 9 →

chevyaz

Forum Replies Created

Navigation

Contact Us