Forum Replies Created
-
AuthorReplies
-
Thank you i get them re balnce
Thanks
The one i took off i open it and it has a board there only one. It has 5pin the new one only have 2. And it only control the driver side.
Im looking to see if i get the original at fordUpdate . I havent been able get code. I ran truck compressor come on. The rear dont come up.. i spry air line and connection to comppressor and rear. No leaks.
I spray compressor.
Were i do her some leak sound is by the compressor.I belive the compressor is piston in side. Can somehow. It run but no air actually come out.
I dont know were else to check.
I dont think is the rely cause compressor turns on. Not the leveling sensor cause it detect is low. Line look ok
Any ideasthanks, I will check it as soon as i can
thanks
thanks
shouldn’t i check and clean out any metal shavings. my truck has 67000 but it is a 2009
what the best thing todo..Most of the time, fairly new fail gasket, usually is cause, by improper installation, not torque properly.
hey, I had some what same problem.. every time i turn on ac idle go down.. after some investigation.. i found out that my temperature sensor was bad.. i replace it and all was good… i also clean out the throttle body and i check the idle valve…
thanks for the tips…
I did some inspection. i check hose no cracks .. the radiator is not even a year old.. there is no leak around the radiator…
well i added some water and turn car on i seen no leak from hose nor radiator…. what i found was not good..
with the car off.. i added more water there is a big leak coming from the bottom of the engine..what can it be…..
can it be a blown gasketwere is that plug is it possible that it blow out…
thank you all… good new i found the leak.. yeaaa..
i found the bypass hose bad.. i replace it no leaks.. ran car for a while no overheating..
we good for now.. am going to clean up engine and re inspect….
i thank you all.. for your help…
Im a train mechanic not car but so far i can defend my self..
-
AuthorReplies