Hi all, I hate to hijack this thread but I have a similar problem/question about rear suspension on a 93 Honda Civic. I just replaced the rear struts and strut mount bushings (center) on my gf’s 1993 Honda Civic EX and now both tires are toed out. I have been doing lots of research on the internet and found this site and thread ,thankfully, that seems to be getting me on the right track. Anyway, I was talking to a mechanic friend of mine today who said I probably swtiched around the rear upper, inner control arm bushings and that could be part of the toe problem with the tires. I have kinda gathered there is a long side and short side to this component so I must have gotten it backwards when I reinstalled it. Does this sound right? Can I just 180 degree those bushings and that will help with the toe problem on the tires. I’m thinking about getting all new ones, for each side as i’m sure the OE parts are worn out. The plastic has worn away a lot. Anyway, sorry again to hijack the thread but this seemed a great place to start. Thanks all in advance for your feedback.