[yegor]

attached a video. this time i noticed that the noise is more audible coming from the right (passenger) side of the vehicle. now, i dont know if this is becuase the presumably unrelated ticking noise is coming from the left and masking it. the video i took here captures the noise as i was standing at the rear passenger side of the vehicle. I still cant 100% say if its coming from the back or front, near the front it now sounds more metally, while in the back it sounds more thumpy.

I dont have any codes, but i did notice the “service engine soon” light came on while i was filming this video. i dont have a code reader but i can go to the store and buy one tomorrow and see if anything comes up.

thanks for your help

*edit: i filmed the noise from the back because near the ticking engine noise covers up the sound too much if filmed from the front.

Attachments:

• carNoise.zip

[yegor]

thats the best video i could get

[yegor]

thats the best video i could get

[yegor]

Yes, sorry, the temperature is good, just under the halfway mark, more towards the cool side.

The engine mounts cost about 500 between the two of them, so i dont think they were cheap, although i cant recall what brand they were.

I also smelled the dipstick that goes into the transmission fluid, and it doesnt smell burned.

I actually rechecked my idle RPM, and it looks to be a little under 1000, kind of between the 500 and 1000, so i think my RPM is actually accurate.

I just noticed that the car is making a sort of squeaking noise that can be heard from the back wheels. I got the noise on video, but i am having trouble uploading them. hopefully i can get them up before the end of the day.

[yegor]

Yes, sorry, the temperature is good, just under the halfway mark, more towards the cool side.

The engine mounts cost about 500 between the two of them, so i dont think they were cheap, although i cant recall what brand they were.

I also smelled the dipstick that goes into the transmission fluid, and it doesnt smell burned.

I actually rechecked my idle RPM, and it looks to be a little under 1000, kind of between the 500 and 1000, so i think my RPM is actually accurate.

I just noticed that the car is making a sort of squeaking noise that can be heard from the back wheels. I got the noise on video, but i am having trouble uploading them. hopefully i can get them up before the end of the day.

[yegor]

Ahh sorry, i opened the page in a different browser and now i can see the videos. thanks a bunch.

[yegor]

Ahh sorry, i opened the page in a different browser and now i can see the videos. thanks a bunch.

[yegor]

Yes, the car is an automatic.

What do you mean by “does the car come up to temp”?

Car has 136766 miles on it.

I cant see the video, could you post a link please?

Thanks again.

[yegor]

Yes, the car is an automatic.

What do you mean by “does the car come up to temp”?

Car has 136766 miles on it.

I cant see the video, could you post a link please?

Thanks again.

[yegor]

Yeah, that would make sense, since i do hear some banging from under the car towards the back, as well as from the front.
However, i had the engine mounts replaced last summer, and this banging only just started now.

[yegor]

Yeah, that would make sense, since i do hear some banging from under the car towards the back, as well as from the front.
However, i had the engine mounts replaced last summer, and this banging only just started now.

[yegor]

No check engine light.

Is 1000 Rpm idle out of range?

I have not cleaned or unplugged the throttle body. How do i go about doing that?

I have also not checked for vacuum leaks, how do i do that?

Sorry if I sound needy, i am pretty new at this DIY thing.

Thanks for all the help so far.

[yegor]

No check engine light.

Is 1000 Rpm idle out of range?

I have not cleaned or unplugged the throttle body. How do i go about doing that?

I have also not checked for vacuum leaks, how do i do that?

Sorry if I sound needy, i am pretty new at this DIY thing.

Thanks for all the help so far.

[yegor]

idle is around 1000 rpm, and i will try to get a video tomorrow, as it is already dark outside.

just to be clear, the hard shifting was solved when i got the engine mounts replaced. the hard movement only occurs when i start the car, the shift from park to drive is smooth.

I have not checked the transmission mounts, how would they cause the shaking on car start up? the shaking when shifting gears was solved when i had the engine mounts replaced.

[yegor]

idle is around 1000 rpm, and i will try to get a video tomorrow, as it is already dark outside.

just to be clear, the hard shifting was solved when i got the engine mounts replaced. the hard movement only occurs when i start the car, the shift from park to drive is smooth.

I have not checked the transmission mounts, how would they cause the shaking on car start up? the shaking when shifting gears was solved when i had the engine mounts replaced.

[Author]

Replies