[Luke]

Alright thanks

[Luke]

No it doesn’t seem to be bent and is still connected. But say if it was bent, I should still be able to work the pedal even if it’s just a little bit, I couldn’t move it at all

[Luke]

Clutch fork… umm would that be the part that pushes the throwout bearing?

[Luke]

Help to my previous post, had some trouble with the clutch on my 2006 sand viper dune buggy, it sat for about 5 years without running, I got it running and drove it around a bit, after replacing the clutch cable, and then it wouldn’t allow me to depress the clutch pedal. I tore it apart, pulled the tranny and clutch, both the clutch and pressure plate are still in good condition, no ware no gouges, so not sure if it’s really needing replacing, although before I unbolting the pressure plate i did notice that the clutch plate was not totally center. What’s ur opinion?

[Luke]

Nobody here knows anything huh???

[Author]

Replies