[bmcqueen13]

called the dual speed. Kobalt from lowes and Duralast from autozone

[bmcqueen13]

called the dual speed. Kobalt from lowes and Duralast from autozone

[bmcqueen13]

Not ones that fit. And dealer says you have to buy the whole fuel line. Theres alot of complaint online about the ford fuel clip and the availability. But im gonna call a different dealer. The one closest is a little sketchy.

[bmcqueen13]

ok So Check engine light is out. Seems to have worked. I went to the Honda Dealer to see if they had pins for this connector. They had a million pins similar but nothing quite like the ones i needed. So i bought about 10 of the in different pins just in case. I couldn’t get any of them to fit in there like i wanted them to. So i just got the old pins got them crimped.m Soldered them in nice and good. The hardest part was trying to solder the wires from the car to the connector. Because it was part of a wiring harness. Had to do it over head next to the vapor canister. and of course Honda only gave you the bare min amount of wire to use. So it was tough to say the least. But all in all, its done engine light is out. Thanks for all the help guys

[bmcqueen13]

Where would i get new pins for the connector

[bmcqueen13]

well i will try to go there tomorrow i hope they have what i need.

[bmcqueen13]

I thought about getting the connector at a junk yard. But I Cant find a junk yard around that has 8th gen civic. I dont know if i can push the pins out without breaking the whole connector

[bmcqueen13]

ok got connector apart without breaking. now to see if i can get it to work

[bmcqueen13]

ok since i got the wire apart. the wire on the car harness is really thin.. does it matter what guage wire i use

[Author]

Replies