Forum Replies Created
-
Replies
-
Cool!!!!! ok so im pretty sure i checked the fuse last time with a test light and it turned on so i assume there is a break from the fuse box to the door. ive tested the door jam with the test light on the pink line that should supply power and nothing so i wana try pulling the plasic door trim and i assume thats where i would find the wires that go to the door correct? and what i would need to do is just poke into the line and test to see if it powers on until i find the break?
Yeah no power appeared on my test light when I tested the power wire at the door jam rubber boot. I obviously can’t check the wire inside the pillar but my best guess is figuring out where it connects too. I assume it just runs to the engine bay fuse box but idk maybe it goes else where ?
I looked at that wire diagram website and it’s just scamatics and doesn’t really tell me where the wire flows from start to end. :/
I’m sure it’s a issue where it starts but I don’t know where that is lol
So i found the reason for why it’s not working I tested the door’s pink wire and it had no power i checked the other side door wires as my comparison. Now why that line has no power is the next issue i don’t know where else to look where it connects… I think i connects the engine bay fuse box but there is only 3 pink wires maybe I’m missing one? where can i get a detail pic or answer to where the door wires connect too.(source)
Damn, could it really be a broken wire? its only 3 years old but from the looks of it i guess it could be…. 🙁
After reading that article the best thing I could find is this
I think it should be enough support to compensate for the dent. I wish they made high-density foam in a can but they don’t so some pillar foam will be my next pick since it’s listed as ridged and not simi ridged
thanks for that link helped alot!
*****UPDATE*****
Woh, call me crazy but i just found this stuff people use to pour to into fence posts that’s suppose to replace concrete and i’ve seen people stand on this and it didn’t give in. I think this would be super strong! i think it might be over kill?
what do you think? go with the 3m pillar foam which is just stiff foam or this concrete foam which is rock hard?
I mean the A pillar isn’t something destroyed to dust. Just has 1 dent thats the size of the pam of your hand thats a bit unleveled
Hi i just got my wheels balanced again and it helped lower the vibrations id say it helped but there is still some noticeable vibrations.
I’m going to be try the rotters and brakes this weekend and see how it goes, i dont have a tore wrench do u think it will be a problem? or can i just hand tight it until i cant turn it with a socket?
Hi! the problem is im not sure where its located but im guessing its in the fuel tank at this point i crawled under but didn’t notice anything that would be it unless im blind 2012 honda accord