Menu

Dennis

Forum Replies Created

Viewing 14 replies - 1 through 14 (of 14 total)
  • Author
    Replies
  • in reply to: etcg repair video. suggestion #571371
    DennisDennis
    Participant

      also I would have let you do the repair video on my truck due to me not living that far away. but I already have done the repair. I also want to thank you for all the video’s that you have done that has helped me repair my own cars and saving me some money and doing the repair the right way to keep from having issue with them down the road.

      in reply to: etcg repair video. suggestion #577944
      DennisDennis
      Participant

        also I would have let you do the repair video on my truck due to me not living that far away. but I already have done the repair. I also want to thank you for all the video’s that you have done that has helped me repair my own cars and saving me some money and doing the repair the right way to keep from having issue with them down the road.

        in reply to: etcg repair video. suggestion #571363
        DennisDennis
        Participant

          Eric that’s not a problem. I just know there are tons of these trucks out there. And I know it would save a lot of people money on as very simple repair. thanks

          in reply to: etcg repair video. suggestion #577939
          DennisDennis
          Participant

            Eric that’s not a problem. I just know there are tons of these trucks out there. And I know it would save a lot of people money on as very simple repair. thanks

            in reply to: The Big Bang ?? #571186
            DennisDennis
            Participant

              I had a 98 Camaro do this after a cam swap. It ended up being a motor mount the rubber broke away form the metal and it would make a loud bang in the dash because the engie would hit the fire wall of the car. I would look at the fire wall to see if there are any marks where the motor is hitting the fire wall.

              in reply to: The Big Bang ?? #577765
              DennisDennis
              Participant

                I had a 98 Camaro do this after a cam swap. It ended up being a motor mount the rubber broke away form the metal and it would make a loud bang in the dash because the engie would hit the fire wall of the car. I would look at the fire wall to see if there are any marks where the motor is hitting the fire wall.

                in reply to: 2002 windstar electical issue #571037
                DennisDennis
                Participant

                  I also always get the car facts report. and the van was clean of accidents.

                  in reply to: 2002 windstar electical issue #577599
                  DennisDennis
                  Participant

                    I also always get the car facts report. and the van was clean of accidents.

                    in reply to: 2002 windstar electical issue #571036
                    DennisDennis
                    Participant

                      Thanks I will check that out. the van does have 335000 miles on it so Im sure that could be the problem. I will use the tape method first and see if it works out.

                      in reply to: 2002 windstar electical issue #577597
                      DennisDennis
                      Participant

                        Thanks I will check that out. the van does have 335000 miles on it so Im sure that could be the problem. I will use the tape method first and see if it works out.

                        in reply to: 2002 windstar electical issue #571035
                        DennisDennis
                        Participant

                          Thanks I will check that out. the van does have 335000 miles on it so Im sure that could be the problem.

                          in reply to: 2002 windstar electical issue #577595
                          DennisDennis
                          Participant

                            Thanks I will check that out. the van does have 335000 miles on it so Im sure that could be the problem.

                            in reply to: water pump issue #570920
                            DennisDennis
                            Participant

                              I would like to thank you for the info on that i would have never have thought of that. Thanks again.

                              in reply to: water pump issue #577466
                              DennisDennis
                              Participant

                                I would like to thank you for the info on that i would have never have thought of that. Thanks again.

                              Viewing 14 replies - 1 through 14 (of 14 total)
                              Loading…