Wheel hub mounting hardware? Wheel hub bolt?

[Alvin]

I am looking for new bolts (not studs for wheel lug nuts) since I am looking to replace my wheel hub assembly on my 2007 mitsubishi eclipse. Is the bolt size to mount the wheel hub assembly M12x1.25 as described below (since the replacement part did not come with new ones)?

Thanks in advance!

https://www.rockauto.com/en/moreinfo.php?pk=1118169&cc=1433268&jsn=27

TIMKEN HA590108

Bearing Type BALL
Bolt Circle Diameter B (in) 4.500
Bolt Circle Diameter H (in) 4.421
Bolt Quantity 4.000
Bolt Size (in) M12x1.25
Brake Pilot Dia (in) 2.717
Driven_Non Driven Driven
Flange (#) 2.000
Flange Diameter (in) 5.590
Flange Offset (in) 1.598
Flange Shape Modified
Generation Type 3
Hub Pilot Dia G (in) 3.425
Roll Form (Y) N
Spline Quantity 27.000
Wheel Pilot Dia (mm) 67.000
Wheel Studs (Y/N) Y
Wheel Stud Qty 5.000
Wheel Stud Size (in) M12X1.5

Topic

[Richard Kirshy]

According to the parts call out.
I would say yes.
Did you order the part from RockAuto?
If so you might contact them and inquire why the bolts are not with the bearing.
Though in many cases the original bolts are reused, therefore not included.

[Alvin]

I actually found the part number and placed the order. The bolts come with some of the wheel hubs but not with timken which I preferred over duralast at AutoZone. Unfortunately, the oem websites listing compatibility and diagrams from the tearstone manual didn’t list the bolt even when the diagram clearly shows a mounting) wheel knuckle bolt! For Mitsubishi, it is called the ASA database where it can be found online… Same as the dealerships’ lookup.

[Richard Kirshy]

My guess is that timken does not offer the bolts as an included replacement.
Not really unusual.

[Author]

Replies