- This topic has 419 replies, 141 voices, and was last updated 1 year, 1 month ago by
.
-
Topic
-
-
Replies
-
24 inch imitation Harbor Freight “Crescent” wrench. I was helping my brother with his ’56 VW; the rear axle nuts are a bitch. I normally use 3/4 drive 36 mm socket; however 3/4 drive set was 420 miles away. I used to carry a 24 inch Crescent when I was around farm machinery a bunch.
24 inch imitation Harbor Freight “Crescent” wrench. I was helping my brother with his ’56 VW; the rear axle nuts are a bitch. I normally use 3/4 drive 36 mm socket; however 3/4 drive set was 420 miles away. I used to carry a 24 inch Crescent when I was around farm machinery a bunch.
Irwin Needle Nose Vise Grip Pliers – http://www.amazon.com/Irwin-15-9LN-8-Inch-Capacity-9-Inch/dp/B00004SBB2/ref=sr_1_7?ie=UTF8&qid=1413855987&sr=8-7&keywords=irwin+needle+nose
Irwin Needle Nose Vise Grip Pliers – http://www.amazon.com/Irwin-15-9LN-8-Inch-Capacity-9-Inch/dp/B00004SBB2/ref=sr_1_7?ie=UTF8&qid=1413855987&sr=8-7&keywords=irwin+needle+nose
Last thing I bought that was very useful is 1/4in drive GP 6s socket set. http://www.gpsocket.com/products/category.phtml/impact_socket_sets/1_4/#6s_point
This is hands down one of the best purchases I have ever made the 6s has taken out bolts that others were about to use turbo sockets on and they work so well even when the bolt is rounded its insane. Planning on buying these in 3/8, 1/2, and 3/4″ after I get some other much needed tools. I would actually sugguest eric the car guy do a review/endorsement/promo of these.
Last thing I bought that was very useful is 1/4in drive GP 6s socket set. http://www.gpsocket.com/products/category.phtml/impact_socket_sets/1_4/#6s_point
This is hands down one of the best purchases I have ever made the 6s has taken out bolts that others were about to use turbo sockets on and they work so well even when the bolt is rounded its insane. Planning on buying these in 3/8, 1/2, and 3/4″ after I get some other much needed tools. I would actually sugguest eric the car guy do a review/endorsement/promo of these.
Estwing Dead Blow Ball Peen (50 ounce)
Estwing Dead Blow Ball Peen (50 ounce)
Cornwell 1/2″ drive 18mm shallow impact socket. Which I mainly couple with a 1/2″ drive U-joint and use for caliper bracket bolts. $13 well spent.
Cornwell 1/2″ drive 18mm shallow impact socket. Which I mainly couple with a 1/2″ drive U-joint and use for caliper bracket bolts. $13 well spent.
A little screw driver from Menards to replace one I lost. As soon as I put it in my box I found the old one.
A little screw driver from Menards to replace one I lost. As soon as I put it in my box I found the old one.
I just bought matco inverted torx impact sockets 3/8″ and 1/4″ drive. They are also known as etorx sockets. Along with that I bought a used craftsman small slip joint pliers, small fuller adjustable wrench 6″, 3/8″ and 1/2″ drive 13/16″ craftsman spark plug sockets. Also ordered about $150 dollars worth of impact extensions all the ones I was missing from grey pneumatic.
- You must be logged in to reply to this topic.