Menu

Uncertain over OBD2 Devices for my Honda

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Uncertain over OBD2 Devices for my Honda

  • Creator
    Topic
  • #456515
    MegaBiteMegaBite
    Participant

      On my 2003 Honda Accord EXL 2.4L A/T,120K

    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • #456516
      fitonefitone
      Participant

        If you have a drive by wire throttle body you might have damaged it by doing the cleaning that you had mentioned. Several questions and issues have been mentioned in this forum after trying to clean a drive by wire throttle body. Basically leave these alone unless you are having problems.

        #456517
        EricTheCarGuy 1EricTheCarGuy
        Keymaster

          Yep you don’t ‘clean’ a DBW throttle body. I would suggest taking it to a dealer and having them reset it for you as I don’t think you’ll be able to do it with the scanners you mentioned.

          #456518
          MegaBiteMegaBite
          Participant

            thanks for the replies.

            #456519
            Trcustoms719Trcustoms719
            Participant

              Quoted From EricTheCarGuy:

              Yep you don’t ‘clean’ a DBW throttle body. I would suggest taking it to a dealer and having them reset it for you as I don’t think you’ll be able to do it with the scanners you mentioned.

              I own a MaxiDAS 708 and I do believe it does it on Hondas.
              But taking it to the dealer for him would be the best bet cause it’s MUCH cheaper then buying a scan tool just to fix his problem.

            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…