Turn signals not working [solved]

[Matt]

It started with my turn signals acting up, sometimes working, sometimes not, sometimes blinking rapidly.
Then they both just seem to stop working, although the hazards still work fine, as do all the bulbs.

I noticed recently that if I hold the turn signal in a very specific place (just before they lock in place) that they both work fine. Would this be a turn signal relay problem, or something else?

P.S. I also have an ignition disabler that is suppose to only start the car when the right turn signal is active, but the immobilizer no longer works (the cars starts regardless of turn signal position)

Topic

[Darren]

Sounds like the switch in the steering column is worn out. Pretty simple to replace, but you have to pull the steering wheel off which will require a puller. You could also try getting them to work while tilting the column up and down to see if they work which would also point to the switch, or wiring going to it. However, since you said they work, but only in certain positions I would suggest a new switch.

[Ron]

Definitely the turn signal switch.

Sent from my iPad using Tapatalk

[Matt]

Thanks for the help guys.
It was indeed the switch. I didn’t even need to replace it, I just opened it up and cleaned the contacts with some rubbing alcohol and Q-tips B) .

[Author]

Replies