- This topic has 2 replies, 2 voices, and was last updated 5 years, 10 months ago by
.
-
Topic
-
Hello grease heads, I’m having diffaculty removing my transmission from my 07 chevy impala ss 5.3. I have removed every bolt and I have separated the bell house about 1/4 of an inch is there any good way to separate the transmission other than just man handling it or prying on it to remove it? And before anyone say I forgot I bolt yes everything is removed nothing is holding it in other than what appears to be a guide pin it got too dark for me to continue trying to get it out so idk if its hitting anything on the way out but from what I could see at the time nothing was in the way. I got the shift link removed the 5 bell housing screws removed and the support bracket on the passinger side removed. The torque converter bolts are also removed. If anyone removed a transmission before can give me some pointer I would appreciate it because I’m now beginning to get frustrated after doing all this work to get to the transmission to have it only separated a 1/4 of an inch
-
Replies
-
The alignment dowel pins probably got stuck from corrosion buildup. If you have room to squeeze a pry bar down the sides, do so and work as close to those pins as you can. I think you might have to just trust yourself with a little more aggression and leverage.
- You must be logged in to reply to this topic.