Surging? Misfire?

[sjrobinson]

So its happening again- worse. Ima just copy and post my question from yahoo answers cuz I’m too lazy to explain it all.

Topic

[Cheezit]

I had a similar hesitation problem, especially when switching from 1st to 2nd and 2nd to 3rd gear, rpm’s under 3000.

[sjrobinson]

Thanks stuzman. Youve

[EricTheCarGuy]

Honda MAP sensors hardly ever have a problem so if you have damaged wiring I would suggest repairing that properly (soldering it) and then recheck for the symptom.

[hbvx]

Eric, would bad wiring show itself by testing the wires into the harness via backprobing, or something of this nature with a proper tool(DVOM???)?_x000D_
_x000D_
If so, what is the proper way to do this? Could you list a video of yours?_x000D_
_x000D_
(if say for instance, you d

[sjrobinson]

I will try soldering it then. While I’m trying to figure out how to mount my camera so I can record the Ultra-gauge, back to timing. I notice at idle its at 15 and with acceleration and cruising its around 30. Is that normal?

[EricTheCarGuy]

The computer reads voltage, if the voltage is incorrect or inconsistent

[sjrobinson]

Ok. Well I’m going to solder the map sensor wires and see what happens.

[EricTheCarGuy]

With damage to wiring in one place it’s possible there are other places that also have issues.

[Author]

Replies